Chrysler R4801866AC ALTERNATO-Engine

You can Select Your Vehicle to check if R4801866AC fits your vehicle.

To replace the alternator in a vehicle with 3.5L or 3.6L V6 engines: Disconnect the negative battery cable. Remove the drive belt. On 3.5L engines, remove the upper mounting bolt and support bracket bolt, and remove the support bracket. On 3.6L engines, detach the B+ cable and electrical connector, then unscrew the upper mounting bolts. Raise the vehicle and secure it on jackstands. Remove the middle engine splash shield. On 3.5L models, disconnect the battery cable from the B+ output terminal and the field wire electrical connector. Remove the lower alternator mounting bolt(s) and remove the alternator. Installation is the reverse of removal. After installation, check the charging voltage to verify that the alternator is operating correctly.