Make sure this part fits

Chrysler 4892293AC Exhaust Valve Arm

2007 Chrysler 4892293AC

Customer Questions & Expert Answers (12)
Mopar 4892293AC Exhaust Valve Arm
  • Part Description
    Arm-Inlet And Exhaust Valve ; Rocker Arm Assembly Inlet And Exhaust Valve
  • Manufacturer
    Mopar
Make sure this part fits
$566.33 MSRP: $873.00
You Save: $306.67 (36%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4892293AC
    Part DescriptionArm-Inlet And Exhaust Valve ; Rocker Arm Assembly Inlet And Exhaust Valve
    Item Dimensions3.1 x 7.1 x 16.0 inches
    Item Weight8.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4892293AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007 Chrysler 3006 Cyl 3.5LTouring AWD, Touring RWD
    2007 Chrysler Pacifica6 Cyl 4.0LBase AWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    2007 Chrysler Sebring6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4892293AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do if any of the components are found to be worn or damaged during inspection for the 2009 Chrysler 300? Posted by Customer
    A:
    If any components are worn or damaged, replace them with new ones and install new shafts as well.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the lash adjusters before installation for the 2009 Chrysler 300? Posted by Customer
    A:
    They should be at least partially full of oil.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What is the procedure for removing rocker arms and pedestals for inspection for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Extract the dowel pins using a 4 mm screw, nut, washer, and spacer, and remember to use new dowel pins during installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What precautions should be taken when handling the rocker arm assembly during removal for the 2005 Chrysler 300? Posted by Customer
    A:
    Ensure that the rocker arm assembly is not placed upside down or rested on the lash adjusters to prevent potential damage.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the alternative to using the valve spring compressor for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The only alternative involves major disassembly of the engine and surrounding components by removing the timing chains and camshafts.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken during installation to prevent damage to the rocker arms for the 2009 Dodge Charger? Posted by Customer
    A:
    When installing the rocker arms and pedestals in their previously marked order, keep the intake rockers on the intake shaft and exhaust rockers on the exhaust shaft, ensuring that the notches in the rocker arm shafts face upward when assembled to prevent damage to the rocker arms.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    In what sequence should the rocker arm shafts be tightened when reassembling for the 2008 Dodge Charger? Posted by Customer
    A:
    Tighten the rocker arm shafts starting with the center bolt, followed by the center right bolt, center left bolt, outer right bolt, and finally the outer left bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the rocker arm and lash adjuster for each valve for the 2007 Dodge Charger? Posted by Customer
    A:
    They should be kept together and reinstalled in the same locations.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the lash adjusters before installation for the 2008 Dodge Magnum? Posted by Customer
    A:
    They should be at least partially full of oil.
    Posted by MoparPartsGiant Specialist
    Q:
    Why should engine assembly lube be applied to the ends of the valve stems and upper ends of the pushrods for the 2007 Dodge Magnum? Posted by Customer
    A:
    This is done to prevent damage during initial start-up.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What areas should be inspected on the rocker arm pivot area and shaft for the 2005 Dodge Magnum? Posted by Customer
    A:
    Inspect the rocker arm pivot area and shaft for wear, cracks, and galling, and replace any worn or damaged rocker arms or shafts.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4892293AC, the Right Choice

To ensure reliability, purchase Mopar part # 4892293AC Exhaust Valve Arm. It is sometimes referred to as Chrysler Rocker Arm. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Pacifica, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4892293AC Exhaust Valve Arm. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly