Make sure this part fits

Chrysler 5161251AA Boot-Half Shaft

2004-2007 Chrysler 5161251AA

Customer Questions & Expert Answers (7)
Mopar 5161251AA Boot-Half Shaft
  • Part Description
    Boot Kit Half Shaft Outer
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5161251AA
    Part DescriptionBoot Kit Half Shaft Outer
    Other NamesOuter Boot
    Item Dimensions7.5 x 4.6 x 4.6 inches
    Item Weight1.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5161251AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2006 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 3.8LBase AWD, Base FWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    2005-2007 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EX, Limited FWD, LX FWD, Touring FWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5161251AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to check CV Boot on Dodge Caravan? Posted by Customer
    A:
    First of all, check for steering-free play by rocking the wheel gently. Test shock absorbers by pushing down on each corner and check for fluid leakage. Check the steering linkage, tie-rod ends, ball joints, and suspension arm bushings for looseness, damage, or wear. Inspect the CV boots for damage, as they protect the CV joints.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect on the driveaxle for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    The driveaxle boots for tears, cracks, and loose clamps.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do after disassembling the inner CV joint for the 2004 Dodge Caravan? Posted by Customer
    A:
    Inspect and clean all components, replacing any worn parts.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you disassemble the inner CV joint for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Disassemble the inner CV joint by cutting the boot clamps, removing the boot, and exposing the tripod spider assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    How should hard plastic boots on driveaxles be replaced, and what steps are involved in securing them for the 1990 Dodge Grand Caravan? Posted by Customer
    A:
    For hard plastic boots on SSG left inner and both outer CV joints, place the clamp for the smaller boot end onto the driveaxle shaft. Slide the boot onto the shaft, aligning the lip with the third locating groove closest to the shaft's center, and center the clamp over the boot end. Utilize a clamp crimping tool to secure the clamp in place. Finally, install the CV joint and fit the large boot end over the CV joint housing, securing it with a clamp using the same crimping procedure.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What steps should be taken to inspect the driveaxle boots for the 2016 Dodge Grand Caravan? Posted by Customer
    A:
    Raise the front of the vehicle and support it securely on jackstands. Crawl under the vehicle and check the four driveaxle boots (two on each driveaxle) very carefully for cracks, tears, holes, deteriorated rubber, and loose or missing clamps.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5161251AA, the Right Choice

To ensure reliability, purchase Mopar part # 5161251AA Boot-Half Shaft. It is sometimes referred to as Chrysler CV Boot. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Pacifica, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5161251AA Boot-Half Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly