Make sure this part fits

Chrysler 4797700 Boot Kit-Half Shaft

1996-2007 Chrysler 4797700

Customer Questions & Expert Answers (9)
Mopar 4797700 Boot Kit-Half Shaft
  • Part Description
    Boot Kit Half Shaft Inner
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4797700
    Part DescriptionBoot Kit Half Shaft Inner
    Other NamesBoot, Boot Kit, Inner Boot
    Item Dimensions5.6 x 3.9 x 4.0 inches
    Item Weight1.20 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4797700
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2000, 1996 Chrysler Cirrus4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5LLX, LXi
    2000 Chrysler Grand Voyager6 Cyl 3.0L, 6 Cyl 3.3LBase, SE
    2004-2006 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 3.8LBase AWD, Base FWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    1996-2006 Chrysler Sebring4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L, 6 Cyl 2.7LBase Convertible, Base Sedan, GTC Convertible, JX, JXi, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan
    1996-2007 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.5L, 6 Cyl 3.8LBase, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD, SX, Touring AWD, Touring FWD
    2000-2003 Chrysler Voyager4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8LBase, EC, LX, SE
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4797700 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect in the CV joints for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Inspect the CV joints for excessive radial play and ensure smooth operation throughout their range of motion.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before separating the CV joint housing from the axleshaft for the 1998 Chrysler Cirrus? Posted by Customer
    A:
    Mark the CV joint housing to the axleshaft before separating them.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What can happen if the drive axle boots are damaged for the 1999 Chrysler Cirrus? Posted by Customer
    A:
    Serious and costly damage can occur to the CV joints.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do after exposing the tripod spider assembly for the 2004 Dodge Caravan? Posted by Customer
    A:
    After exposing the tripod spider assembly, remove the spider assembly snap-ring, mark the relationship of the tripod to the axle shaft, and carefully drive the spider assembly off the shaft.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you inspect on the driveaxle for the 2006 Dodge Caravan? Posted by Customer
    A:
    The driveaxle boots for tears, cracks, and loose clamps.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How can you check the ball joints for wear for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Try to move each control arm up and down.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What steps should be taken to inspect the driveaxle boots for the 2007 Dodge Grand Caravan? Posted by Customer
    A:
    Raise the front of the vehicle and support it securely on jackstands. Crawl under the vehicle and check the four driveaxle boots (two on each driveaxle) very carefully for cracks, tears, holes, deteriorated rubber, and loose or missing clamps.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to clean and grease the CV joint during the boot replacement process for the 1987 Dodge Grand Caravan? Posted by Customer
    A:
    Thoroughly clean the old grease from the CV joint, and repack it using the grease provided in the kit. Additionally, pack the interior of the new boot with the remaining grease.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4797700, the Right Choice

To ensure reliability, purchase Mopar part # 4797700 Boot Kit-Half Shaft. It is sometimes referred to as Chrysler CV Boot. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Pacifica, Sebring, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4797700 Boot Kit-Half Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly