Chrysler 4578052AB Bracket-Engine Mount

You can Select Your Vehicle to check if 4578052AB fits your vehicle.

After raising the vehicle and securing it on jackstands, remove the front wheels and tires.

To raise the engine slightly during the check, a jack is positioned under the engine oil pan, and a large wood block is placed between the jack head and the oil pan.

Use a large screwdriver or prybar to attempt to move the mounts.

For replacement, follow these steps: Disconnect the cable from the negative terminal of the battery. Raise the vehicle and support it securely on jackstands (if not already done). Position a jack under the engine oil pan with a large wood block between the jack head and the oil pan. If you're removing the right side engine mount, remove the alternator support bracket. Remove the engine mount-to-subframe nuts and raise the engine with the jack. Remove the mount-to-engine bracket bolts. Install the new mount, making sure it is correctly positioned in the bracket. Install the fasteners and tighten them securely.

There are three powertrain mounts: left and right engine mounts attached to the engine block and to the subframe, and a rear mount attached to the transmission and the subframe.

The middle engine splash shield and the nuts holding the engine mounts to the subframe need to be removed.