Chrysler VLX02558AB Front Brake Rotor Package

You can Select Your Vehicle to check if VLX02558AB fits your vehicle.

Pull the inboard brake pad from the caliper, ensuring only one pad is removed at this step. Use prybars or screwdrivers to slowly push the caliper pistons into the bores, being cautious to prevent one piston from being forced out while the other is pushed in. Prepare each new brake pad with a small amount of copper-based brake paste on the edges that contact the caliper and backing plates, then position the new inboard brake pad into the caliper. Pull the inner brake pad from the caliper and repeat the piston retraction for the outer pistons. Prepare the new outer brake pad and position it into the caliper.

Pull out the upper and lower guide pins and clean them. Then apply a coat of high-temperature grease to the pins and reinstall them.

Wash the brakes with brake cleaner.

Firmly depress the brake pedal a few times to bring the pads into contact with the disc. Check the level of the brake fluid adding some if necessary. Check the operation of the brakes carefully before placing the vehicle into normal service.