Make sure this part fits

Chrysler 68055040AA Chain-Engine Timing

2010-2014 Chrysler 68055040AA

Customer Questions & Expert Answers (13)
Mopar 68055040AA Chain-Engine Timing
  • Part Description
    Chain & Gear Kit Engine Timing
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68055040AA
    Part DescriptionChain & Gear Kit Engine Timing
    Item Dimensions5.2 x 4.6 x 2.6 inches
    Item Weight2.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68055040AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4LLimited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2010 Chrysler Sebring4 Cyl 2.4LLimited Sedan, LX Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68055040AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the engine cover for the 2014 Chrysler 200? Posted by Customer
    A:
    Remove the drivebelt, tensioner, and idler pulleys, then position the number one piston at Top Dead Center.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    How should the mounting bolts be prepared for installation for the 2011 Dodge Avenger? Posted by Customer
    A:
    Check the threads of each 185 mm mounting bolt with a straightedge or ruler; if there is a gap, replace the bolts and apply clean engine oil to the threads before installation. Clean the bolt holes for the BSM mounting bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the primary chain for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Align the primary chain on the crankshaft sprocket, coat the sprockets and chain with clean engine oil, and install the assembly while keeping the marks aligned. Tighten the idler sprocket fastener, install the primary chain guide and tensioner, and then install the left and right side camshaft phasers and oil control valves, ensuring proper alignment.
    Posted by MoparPartsGiant Specialist
    Q:
    What alignment steps are necessary for the 2008 Chrysler Sebring? Posted by Customer
    A:
    For 2014 and earlier models, align the timing chain plated links with the camshaft phaser timing marks, ensuring proper alignment of the phaser or sprocket marks with the plated links.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the timing chain cover after installation for the 2012 Dodge Avenger? Posted by Customer
    A:
    Clean old sealant from the timing chain cover, apply RTV sealant to the gasket, and install the cover with bolts tightened to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to take after preparing the 2011 Dodge Avenger? Posted by Customer
    A:
    Remove the right-front wheel and drive-belt splash shield, followed by the drivebelt, tensioner, and idler pulley. Next, remove the thermostat housing, upper radiator hose, and heater hose from the water pump, then move the heater core supply pipe out of the way.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for installing the timing chain tensioner for the 2012 Dodge Avenger? Posted by Customer
    A:
    Hold the timing chain tensioner in place, install the chain guide and tensioner, and verify the alignment of all marks after rotating the engine.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    What is the caution regarding the timing system for the 2012 Chrysler 200? Posted by Customer
    A:
    The timing system is complex, and severe engine damage will occur if mistakes are made. Only highly experienced individuals should attempt this procedure, and if there is any uncertainty, consulting an expert is advised.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for installing the primary timing chain for the 2014 Chrysler 200? Posted by Customer
    A:
    Align the crankshaft sprocket with the oil pump housing mark, install the upper chain guides, and prepare to install the primary timing chain by aligning the left camshaft sprocket mark with the light-colored links on the chain. Then lower the sprocket and chain assembly into position, install the right camshaft sprocket, vibration damper, and timing chain, ensuring the colored links align with their respective marks.
    Posted by MoparPartsGiant Specialist
    Q:
    What is necessary before beginning the procedure for replacing the timing chain for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Special tools are necessary to complete this procedure, so it is important to read through the entire process and obtain the required tools before beginning work.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    What is the process for reinstalling the BSM for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Place the timing chain over the crankshaft sprocket, aligning the plated link with the timing mark or previously made marks. Lift the BSM and place the drive sprocket into the timing chain, aligning the plated link with the timing mark on the drive gear.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps in the installation process for the 2014 Chrysler 200? Posted by Customer
    A:
    Install the timing chain and timing cover, followed by the oil pan and valve cover. The remainder of the installation follows the reverse order of removal.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68055040AA, the Right Choice

To ensure reliability, purchase Mopar part # 68055040AA Chain-Engine Timing. It is sometimes referred to as Chrysler Timing Chain. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68055040AA Chain-Engine Timing. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly