Chrysler 55111888AF Air Conditioner And Heater Control

You can Select Your Vehicle to check if 55111888AF fits your vehicle.

To replace the A/C switch on 2015 and later models, follow these steps, First, disconnect the negative battery cable from the remote ground terminal or battery. Carefully pry the A/C switch bezel assembly from the instrument panel, but avoid prying from the top on 2010 and earlier models to prevent damaging the retaining clips. Next, disconnect all electrical connectors from the back of the A/C switch assembly. Then, remove the mounting fasteners at each corner and take out the switch assembly from the bezel. For installation, reverse the removal steps. Note that if the A/C switch assembly is being replaced, calibration/diagnostic tests will be necessary, which require a specialized scan tool. For this service, take the vehicle to a dealer service department or other qualified repair shop.

Yes, calibration/diagnostic tests will be necessary, which require a specialized scan tool. For this service, take the vehicle to a dealer service department or other qualified repair shop.