Make sure this part fits

Chrysler 4608300AD Horn

1998 Chrysler Cirrus 4608300AD

Customer Questions & Expert Answers (2)
Mopar 4608300AD Horn
  • Part Description
    Horn And Bracket High Note
  • Replaced By
    4608300AF
  • Manufacturer
    Mopar
Make sure this part fits
$49.72 MSRP: $71.75
You Save: $22.03 (31%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4608300AD
    Part DescriptionHorn And Bracket High Note
    Item Dimensions6.3 x 3.3 x 6.8 inches
    Item Weight1.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4608300AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998 Chrysler Cirrus4 Cyl 2.4L, 6 Cyl 2.5LLXi
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4608300AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you troubleshoot a horn that doesn't sound on Chrysler Cirrus? Posted by Customer
    A:
    If the horn doesn't sound, check the horn fuses in the Power Distribution Center and fuse block; if a fuse is blown, replace it and retest. If it blows again, there is a short circuit in the horn or wiring between the horn and fuse block. Check the circuit to the horn relay by removing the cover from the interior fuse block; depress the horn pad on the steering wheel to hear a "click" as the horn relay activates. If the relay clicks, proceed to the next step; if not, remove it from the interior fuse block. Using a fused jumper wire, connect terminals 8 and 10 in the fuse block to see if the horns sound. Check for battery voltage to terminals 6 and 8 in the fuse block; if voltage is not present, repair the circuit. Connect a voltmeter between terminals 6 and 7 in the fuse block; no voltage should be present until the horn pad is depressed. If voltage is absent when the horn pad is pressed, the issue lies in the steering column wiring; if present, replace the relay. Reinstall the relay into the fuse block and check for battery voltage at the horn by raising the front of the vehicle and supporting it securely on jackstands. Remove the push-in fasteners and lower splash shield to access the horn's electrical connectors. Disconnect the electrical connector from the faulty horn and connect a voltmeter to the wiring harness connector; battery voltage should be present when the horn pad is depressed. If no voltage is present, there is a fault in the wiring; if voltage is present, replace the horn. If no voltage is present, connect the voltmeter positive probe to the DARK GREEN/PINK wire and the other probe to a good ground on the chassis while depressing the horn pad. If battery voltage is now present, the short exists in the ground circuit; if not, the short exists in the power circuit. Remove the horn relay from the fuse block and connect terminals 8 and 10 with a fused jumper wire; battery voltage should be present at the horn connector. If it is, replace the relay; if not, repair the circuit. After testing, reattach the horn electrical connector, install the splash shield, and lower the vehicle. Both horns are located behind the front bumper on the right side frame rail, one above the other. Raise the front of the vehicle and support it securely on jackstands, then remove the push-in fasteners and lower splash shield. Disconnect the horn electrical connector, remove the mounting bolt, and withdraw the horn from the vehicle. Installation is the reverse of removal, and check horn operation after installation.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4608300AD, the Right Choice

To ensure reliability, purchase Mopar part # 4608300AD Horn. It is sometimes referred to as Chrysler Horn. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Cirrus models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4608300AD Horn. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly