Chrysler 4641525AC Rear Hub Assembly

You can Select Your Vehicle to check if 4641525AC fits your vehicle.

Ensure that the mounting surface inside the steering knuckle and on the driveaxle splines is smooth. Lubricate the driveaxle splines with multi-purpose grease and install the hub/bearing assembly onto the driveaxle and into the steering knuckle. Securely seat the assembly against the steering knuckle by tightening the hub/bearing assembly-to-steering knuckle bolts in a criss-cross pattern. Install the driveaxle/hub nut, brake disc, caliper mounting bracket, and caliper. Then, install the wheel and lug nuts, lower the vehicle, and tighten the driveaxle/hub nut and lug nuts.

Securely support it on jackstands.

In the straight-ahead position, grasp the knuckle and hub assembly, pulling it directly out and off the driveaxle splines, taking care not to disengage the inner CV joint. For inspection, place the assembly on a clean work surface, wipe it clean, and check the knuckle for rust, damage, and cracks. Ensure the bearings rotate freely without excessive noise or looseness and are adequately greased. Disassembly beyond this point may require specialized tools if there are issues with the bearings.