Make sure this part fits

Chrysler 4766719AA Abs Wheel Bearing Kits

2007-2012 Chrysler 4766719AA

Customer Questions & Expert Answers (7)
Mopar 4766719AA Abs Wheel Bearing Kits
  • Part Description
    Hub&Bearing-Brake ; Hub And Bearing Brake
  • Replaced By
    4766719AC
  • Manufacturer
    Mopar
Make sure this part fits
$101.35 MSRP: $256.00
You Save: $154.65 (61%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4766719AA
    Part DescriptionHub&Bearing-Brake ; Hub And Bearing Brake
    Item Dimensions5.9 x 6.8 x 6.8 inches
    Item Weight7.60 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4766719AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4766719AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do I remove and install a front hub/bearing assembly on Chrysler 200? Posted by Customer
    A:
    To remove the hub/bearing assembly, start by loosening the driveaxle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jackstands. Remove the wheel and hub nut. Next, remove the brake caliper, caliper mounting bracket, brake disc, and backing plate from the hub. Disconnect the ABS wheel speed sensor from the knuckle. Remove the hub/bearing assembly mounting bolts from the rear of the steering knuckle. Finally, remove the hub/bearing assembly from the steering knuckle. To install the hub/bearing assembly, ensure that the mounting surfaces inside the steering knuckle and on the driveaxle splines are smooth and free of burrs and nicks. Lubricate the driveaxle splines with multi-purpose grease and install the hub/bearing assembly onto the driveaxle and into the steering knuckle until it is seated. Then, install the hub/bearing assembly-to-steering knuckle bolts and tighten them equally in a criss-cross pattern. Install the driveaxle/hub nut and tighten it. Install the brake disc, caliper mounting bracket, and caliper, and tighten the fasteners. Finally, install the wheel and lug nuts, remove the jackstands, and lower the vehicle. Tighten the lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How do I remove and install a front hub/bearing assembly on Dodge Avenger? Posted by Customer
    A:
    To remove the hub/bearing assembly, start by loosening the driveaxle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jackstands. Remove the wheel and hub nut. Next, remove the brake caliper, caliper mounting bracket, brake disc, and backing plate from the hub. Disconnect the ABS wheel speed sensor from the knuckle. Remove the hub/bearing assembly mounting bolts from the rear of the steering knuckle. Finally, remove the hub/bearing assembly from the steering knuckle. To install the hub/bearing assembly, ensure that the mounting surfaces inside the steering knuckle and on the driveaxle splines are smooth and free of burrs and nicks. Lubricate the driveaxle splines with multi-purpose grease and install the hub/bearing assembly onto the driveaxle and into the steering knuckle until it is seated. Then, install the hub/bearing assembly-to-steering knuckle bolts and tighten them equally in a criss-cross pattern. Install the driveaxle/hub nut and tighten it. Install the brake disc, caliper mounting bracket, and caliper, and tighten the fasteners. Finally, install the wheel and lug nuts, remove the jackstands, and lower the vehicle. Tighten the lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How do I remove and install a front hub/bearing assembly on Chrysler Sebring? Posted by Customer
    A:
    To remove the hub/bearing assembly, start by loosening the driveaxle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jackstands. Remove the wheel and hub nut. Next, remove the brake caliper, caliper mounting bracket, brake disc, and backing plate from the hub. Disconnect the ABS wheel speed sensor from the knuckle. Remove the hub/bearing assembly mounting bolts from the rear of the steering knuckle. Finally, remove the hub/bearing assembly from the steering knuckle. To install the hub/bearing assembly, ensure that the mounting surfaces inside the steering knuckle and on the driveaxle splines are smooth and free of burrs and nicks. Lubricate the driveaxle splines with multi-purpose grease and install the hub/bearing assembly onto the driveaxle and into the steering knuckle until it is seated. Then, install the hub/bearing assembly-to-steering knuckle bolts and tighten them equally in a criss-cross pattern. Install the driveaxle/hub nut and tighten it. Install the brake disc, caliper mounting bracket, and caliper, and tighten the fasteners. Finally, install the wheel and lug nuts, remove the jackstands, and lower the vehicle. Tighten the lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2010 Chrysler Sebring be supported once it is raised? Posted by Customer
    A:
    Support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What bolts should be removed to detach the hub/bearing assembly from the rear knuckle for the 2010 Dodge Avenger? Posted by Customer
    A:
    Remove the bolts retaining the hub/bearing assembly to the rear knuckle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done on the 2014 Chrysler 200 before removing the hub/bearing assembly? Posted by Customer
    A:
    Loosen the hub nut and free the driveaxle splines from the hub.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4766719AA, the Right Choice

To ensure reliability, purchase Mopar part # 4766719AA Abs Wheel Bearing Kits. It is sometimes referred to as Chrysler Wheel Bearing, Chrysler Wheel Hub. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4766719AA Abs Wheel Bearing Kits. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly