Make sure this part fits

Chrysler 5037479AC Injector-Fuel

2013-2014 Chrysler 300 5037479AC

Customer Questions & Expert Answers (8)
Mopar 5037479AC Injector-Fuel
  • Part Description
    INJECTOR Fuel
  • Replaced By
    5037479AE
  • Manufacturer
    Mopar
Make sure this part fits
$94.64 MSRP: $142.00
You Save: $47.36 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5037479AC
    Part DescriptionINJECTOR Fuel
    Item Dimensions1.6 x 1.7 x 3.9 inches
    Item Weight0.50 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5037479AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013-2014 Chrysler 3008 Cyl 5.7LC AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, S AWD, S Luxury Series RWD, S RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5037479AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the injectors for the 2017 Dodge Challenger? Posted by Customer
    A:
    Relieve the fuel system pressure and disconnect the cable from the negative terminal of the battery. Remove the air intake duct and upper intake manifold. Disconnect the fuel supply line from the fuel rail using a special tool. Disconnect the electrical connectors from the fuel injectors and set the injector harness aside. Clean any debris from around the injectors and remove the fuel rail and injectors as a single assembly. Remove the safety clips and injectors from the fuel rail, then remove and discard the O-rings.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you remove an injector from the fuel rail for the 2015 Ram 1500? Posted by Customer
    A:
    Remove the injector retainer clip and pull the injector out. Replace the O-rings and lubricate them before installing the injector back into the fuel rail.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    Is it recommended to attempt to remove and install the connector tubes to the injectors and the injectors themselves at home for the 2014 Ram 1500? Posted by Customer
    A:
    No, it is not recommended to attempt this job at home. It is generally more cost-effective to have this job done by a dealer service department or a diesel specialist.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you remove the fuel injectors for the 2018 Ram 2500? Posted by Customer
    A:
    Remove the air intake duct and disconnect the fuel supply line. Label and disconnect any vacuum hoses and electrical connectors that may interfere with fuel rail removal. Remove the ignition coils and clean any debris around the injectors. Remove the fuel rail mounting bolts and gently rock the fuel rail to loosen the injectors. Remove the fuel rail and injectors as an assembly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    Is it recommended to attempt to remove and install the connector tubes to the injectors and the injectors themselves at home for the 2015 Ram 2500? Posted by Customer
    A:
    No, it is not recommended to attempt this job at home. It is generally more cost-effective to have this job done by a dealer service department or a diesel specialist.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before checking diesel fuel injectors for the 2013 Ram 3500? Posted by Customer
    A:
    It is important to check for fuel line leaks before proceeding with any checks on diesel fuel injectors.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you remove the fuel injectors for the 2012 Ram 3500? Posted by Customer
    A:
    Remove the air intake duct and disconnect the fuel supply line. Label and disconnect any vacuum hoses and electrical connectors that may interfere with fuel rail removal. Remove the ignition coils and clean any debris around the injectors. Remove the fuel rail mounting bolts and gently rock the fuel rail to loosen the injectors. Remove the fuel rail and injectors as an assembly.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5037479AC, the Right Choice

To ensure reliability, purchase Mopar part # 5037479AC Injector-Fuel. It is sometimes referred to as Chrysler Fuel Injector. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5037479AC Injector-Fuel. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly