Chrysler 4641156 Joint, C.V. Outer (See Note)

You can Select Your Vehicle to check if 4641156 fits your vehicle.

Before reassembly, apply a thin coat of oil to all CV joint components. Reassemble the CV joint components, aligning marks as needed, and install the cross in the cage. Rotate the cross into position in the cage and housing, ensuring the marks face out and are aligned. Pack the lubricant into the ball races and grooves, install the balls, place the driveaxle in the vise, slide the boot over it, and install a new circlip in the axle groove. Finally, position the CV joint housing on the axle, align the splines, and secure it by tapping with a soft-face hammer, verifying it's seated on the circlip by testing its pull resistance. Then, install the boot.