Chrysler 52113228AE Front Steering Knuckle

You can Select Your Vehicle to check if 52113228AE fits your vehicle.

If you're working on a 4WD model, start by removing the driveaxle/hub nut. Next, loosen the wheel lug nuts and raise the vehicle, supporting it securely on jackstands. Remove the wheel and then proceed to remove the brake disc and wheel speed sensor. Disconnect the tie-rod from the steering knuckle and support the lower control arm with a floor jack. Separate the upper control arm from the steering knuckle, followed by separating the lower control arm from the steering knuckle. Carefully inspect the steering knuckle for cracks, especially around the steering arm and spindle mounting area, as well as the balljoint stud holes. If any cracks or elongated holes are found, replace the steering knuckle. Finally, for installation, reverse the removal steps and ensure that all suspension fasteners are tightened to the specified torque.