Chrysler 4814033AB Latch-DECKLID

You can Select Your Vehicle to check if 4814033AB fits your vehicle.

To release the latch, one has to open the boot, next, unscrew the push-in fasteners that are used to hold the latch cover in place and then withdraw the cover. After that, the electrical connectors supplying the latch assembly has to be disconnected and the latch bolts have to be loosened in order to disengage the latch from the trunk. In installation, do the operation in reverse, while making sure that the lock cylinder linkage interacts perfectly with latch assembly. Below where the lock is installed there is a hole for the trunk latch and to remove the lock cylinder one has to take out the trunk latch, then using pliers remove the lock retaining clip and pull out the lock on the trunk lid. In the case of installation, then, one simply has to reverse the procedure described above for removal.

They should be lubricated once every 3000 miles or every three months.