Make sure this part fits

Chrysler 68045437AB Exhaust Manifold

2009 Chrysler Aspen 68045437AB

Customer Questions & Expert Answers (11)
Mopar 68045437AB Exhaust Manifold
  • Part Description
    Manifold-Exhaust
  • Position
    Driver Side
  • Replaces
    68045437AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68045437AB
    Part DescriptionManifold-Exhaust
    Other NamesManifold
    Item Dimensions19.6 x 8.3 x 8.2 inches
    Item Weight11.80 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces68045437AA
    ManufacturerMopar
    SKU68045437AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009 Chrysler Aspen8 Cyl 4.7LLimited 2WD, Limited 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68045437AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any specific steps for the 2006 Dodge Durango? Posted by Customer
    A:
    Yes, for 4.7L V8 models, remove the drivebelt, drain the engine coolant, and take out the air inlet duct and air filter housing.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after disconnecting the battery for the 2006 Dodge Dakota? Posted by Customer
    A:
    After disconnecting the battery, raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after reinstallation for the 2006 Dodge Dakota? Posted by Customer
    A:
    Start the engine and check for exhaust leaks between the manifold and cylinder head as well as between the manifold and exhaust pipe.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after disconnecting the battery for the 2006 Dodge Durango? Posted by Customer
    A:
    After disconnecting the battery, raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before installing the manifold for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Use new gaskets and apply anti-seize compound on the bolt threads.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    Are there any additional steps to complete the installation for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Yes, install the heat shields and apply anti-seize compound to the exhaust manifold-to-exhaust pipe bolts. Tighten the exhaust pipe bolts securely.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in disconnecting the exhaust manifold for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before removing the exhaust manifold on the 2014 Ram 1500? Posted by Customer
    A:
    Soak the nuts for at least five minutes with penetrating oil and then replace the fasteners with new ones.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the manifold bolts be tightened during installation for the 2011 Ram 1500? Posted by Customer
    A:
    Tighten the manifold bolts a little at a time, starting with the center bolts and working outward, to the torque.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    Are there any additional steps to complete the installation for the 2015 Ram 1500? Posted by Customer
    A:
    Yes, install the heat shields and apply anti-seize compound to the exhaust manifold-to-exhaust pipe bolts. Tighten the exhaust pipe bolts securely.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68045437AB, the Right Choice

To ensure reliability, purchase Mopar part # 68045437AB Exhaust Manifold. It is sometimes referred to as Chrysler Exhaust Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Aspen models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68045437AB Exhaust Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly