Make sure this part fits

Chrysler 68045560AB Exhaust Manifold

2009 Chrysler Aspen 68045560AB

Customer Questions & Expert Answers (18)
Mopar 68045560AB Exhaust Manifold
  • Part Description
    Manifold-Exhaust
  • Position
    Passenger Side
  • Replaces
    53034138AC, 68045560AA
  • Manufacturer
    Mopar
Make sure this part fits
$48.80 MSRP: $70.75
You Save: $21.95 (32%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68045560AB
    Part DescriptionManifold-Exhaust
    Other NamesManifold, Manifold Gasket
    Item Dimensions19.4 x 7.9 x 7.9 inches
    Item Weight6.10 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces53034138AC, 68045560AA
    ManufacturerMopar
    SKU68045560AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009 Chrysler Aspen8 Cyl 5.7LLimited 2WD, Limited 4WD, Limited HEV 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68045560AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after tightening the bolts for the 2006 Dodge Durango? Posted by Customer
    A:
    Reinstall the remaining components in reverse order of removal, and if working on a right-side exhaust manifold on a 4.7L engine, refill the cooling system.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How do you prepare the engine for manifold removal for the 2006 Dodge Durango? Posted by Customer
    A:
    Connect an engine support fixture or engine hoist to the engine, remove the engine mount through-bolts, and raise the engine enough to allow for the removal of the manifold.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to prepare the 2009 Dodge Ram 1500 for exhaust manifold removal? Posted by Customer
    A:
    The initial steps are to disconnect the cable from the negative terminal of the battery and remove the engine cover. If you're removing the right-side manifold, also remove the air filter housing.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed in order to remove the turbocharger for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    The bolts and brackets retaining the heater line(s) to the exhaust manifold. The bolt retaining the heater pipe(s) to the exhaust manifold. The air filter housing and the air intake hose. The heat shield/noise reduction panel from the exhaust manifold. The EGR cooler. The rear bolt lock plates. The exhaust manifold bolts, exhaust manifold, gaskets, and spacers.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed in order to remove the turbocharger for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    The bolts and brackets retaining the heater line(s) to the exhaust manifold. The bolt retaining the heater pipe(s) to the exhaust manifold. The air filter housing and the air intake hose. The heat shield/noise reduction panel from the exhaust manifold. The EGR cooler. The rear bolt lock plates. The exhaust manifold bolts, exhaust manifold, gaskets, and spacers.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step in disconnecting the exhaust manifold for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2009 Dodge Ram 2500 be positioned for this procedure? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after disconnecting the cable from the negative terminal of the battery for the 2010 Dodge Ram 2500? Posted by Customer
    A:
    Block the rear wheels, set the parking brake, raise the front of the vehicle, and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What components should be disconnected next for the 2016 Ram 2500? Posted by Customer
    A:
    Disconnect the exhaust pipe-to-manifold connections. It's recommended to apply penetrating oil on the studs/bolts and let it soak in for about 10 minutes before attempting to remove them. Note that it may be easier to disconnect the oxygen sensors and remove the front exhaust pipes completely.
    Posted by MoparPartsGiant Specialist
    Q:
    How can warpage of the manifold be checked for the 2017 Ram 1500? Posted by Customer
    A:
    It can be checked with a precision straightedge held against the mating flange. If a feeler gauge thicker than 0.030-inch can be inserted between the straightedge and flange surface, the manifold should be taken to an automotive machine shop for resurfacing.
    Posted by MoparPartsGiant Specialist
    Q:
    What's the procedure for installing the exhaust manifold for the 2012 Ram 1500? Posted by Customer
    A:
    Install the exhaust manifold(s) and fasteners. Tighten the bolts/nuts to the specified torque, starting with the center bolts and proceeding to the outer ones. Approach the final torque in three steps.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be noted during installation for the 2011 Ram 2500? Posted by Customer
    A:
    The studs go in the holes for the front two cylinders, and an additional one goes at the lower rear.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the manifold bolts be tightened during installation for the 2016 Ram 1500? Posted by Customer
    A:
    Tighten the manifold bolts a little at a time, starting with the center bolts and working outward, to the torque.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after installing the exhaust manifold for the 2018 Ram 2500? Posted by Customer
    A:
    Tighten the heat shield bolts to the specified torque and then install the remaining components in the reverse order of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be noted during installation for the 2014 Ram 3500? Posted by Customer
    A:
    The studs go in the holes for the front two cylinders, and an additional one goes at the lower rear.
    Posted by MoparPartsGiant Specialist
    Q:
    What's the next step after raising the engine for the 2018 Ram 3500? Posted by Customer
    A:
    Lower the vehicle and remove the heat shield nuts and the heat shield. Then, remove the bolts retaining the exhaust manifold to the cylinder head, starting with the center ones and working toward the outer bolts. It's important to organize the bolts so they can be installed in their original positions.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if working on a right-side exhaust manifold on the 2014 Ram 3500? Posted by Customer
    A:
    Refill the cooling system before starting the engine.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68045560AB, the Right Choice

To ensure reliability, purchase Mopar part # 68045560AB Exhaust Manifold. It is sometimes referred to as Chrysler Exhaust Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Aspen models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68045560AB Exhaust Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly