Make sure this part fits

Chrysler 4593915AA Intake Manifold

2010-2014 Chrysler 4593915AA

Customer Questions & Expert Answers (13)
Mopar 4593915AA Intake Manifold
  • Part Description
    Manifold-Intake
  • Replaced By
    4593915AB
  • Manufacturer
    Mopar
Make sure this part fits
$471.90 MSRP: $723.00
You Save: $251.10 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4593915AA
    Part DescriptionManifold-Intake
    Item Dimensions22.3 x 19.1 x 9.3 inches
    Item Weight11.20 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4593915AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4LLimited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2010 Chrysler Sebring4 Cyl 2.4LLimited Sedan, LX Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4593915AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in removing the intake manifold fasteners and gasket for the 2012 Chrysler 200? Posted by Customer
    A:
    Remove the intake manifold fasteners and gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after installing the fuel injectors and fuel rail for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Install new intake manifold seals to the manifold, ensuring no rags or towels are left in the manifold ports.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in removing the intake manifold fasteners and gasket for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Remove the intake manifold fasteners and gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for removing the lower intake manifold for the 2009 Chrysler Sebring? Posted by Customer
    A:
    First, remove the upper intake manifold, then label and detach any remaining hoses that may interfere with the removal. Remove the fuel rail and injectors, loosen the lower intake manifold mounting bolts in 1/4-turn increments until they can be removed by hand, and be cautious not to pry between the manifold and the heads to avoid damaging the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step to replace the upper intake manifold for the 2011 Dodge Avenger? Posted by Customer
    A:
    First, relieve the fuel system pressure and disconnect the negative battery cable from the remote ground terminal.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the intake resonator for the 2013 Dodge Avenger? Posted by Customer
    A:
    Take out the intake resonator by loosening the resonator hose clamp, removing the attaching pin, and detaching the resonator.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken before working on the lower intake manifold for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Ensure the engine is completely cool before draining the cooling system and removing the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the fuel injector electrical connectors and vacuum hoses for the 2008 Dodge Avenger? Posted by Customer
    A:
    Disconnect the fuel injector electrical connectors and various vacuum hoses, labeling them as necessary. Also, disconnect the MAP sensor electrical connector, release the wiring harness clips, and remove the intake manifold bolts and nuts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done to the mounting surfaces after removing the upper intake manifold for the 2009 Dodge Avenger? Posted by Customer
    A:
    Clean the mounting surfaces of the lower intake manifold and the upper manifold, inspecting the rubber O-ring gasket for any signs of deterioration; if it is in good condition, it can be reused.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the wiring harness retainers for the 2013 Chrysler 200? Posted by Customer
    A:
    Remove the wiring harness retainers from the upper intake support bracket and the retainer from the stud bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    How should RTV sealant be applied for the 2012 Chrysler 200? Posted by Customer
    A:
    Apply a bead of RTV sealant around the front and rear cylinder head water passages before laying the new gaskets in place, and apply RTV sealant to the manifold side of the gaskets around the water passages.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2011 Chrysler 200? Posted by Customer
    A:
    Remove the air intake duct and air filter housing, then label and disconnect the vacuum hoses and electrical connectors attached to the upper intake manifold and throttle body, including the Electronic Throttle Control system.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4593915AA, the Right Choice

To ensure reliability, purchase Mopar part # 4593915AA Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4593915AA Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly