Make sure this part fits

Chrysler 4593916AA Intake Manifold

2010-2014 Chrysler 4593916AA

Customer Questions & Expert Answers (13)
Mopar 4593916AA Intake Manifold
  • Part Description
    Manifold-Intake
  • Manufacturer
    Mopar
Make sure this part fits
$347.70 MSRP: $513.00
You Save: $165.30 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4593916AA
    Part DescriptionManifold-Intake
    Item Dimensions20.9 x 18.9 x 9.3 inches
    Item Weight10.80 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4593916AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4LLimited Sedan, LX Sedan, Touring Convertible, Touring Sedan
    2010 Chrysler Sebring4 Cyl 2.4LLimited Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4593916AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How is the intake manifold mounted on the 2010 Chrysler Sebring? Posted by Customer
    A:
    On 2014 and earlier models, the intake manifold is mounted to the front side of the cylinder head, while on 2015 and later models, it is mounted at the rear.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be ensured before installing the lower intake manifold for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Ensure that the mating surfaces of the cylinder heads, cylinder block, and intake manifold are perfectly clean, using gasket removal solvents if necessary.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the intake resonator for the 2017 Chrysler 200? Posted by Customer
    A:
    Take out the intake resonator by loosening the resonator hose clamp, removing the attaching pin, and detaching the resonator.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final positioning step for the manifold for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Position the manifold on the engine, ensuring proper alignment over the ports in the cylinder heads, then install the fuel rail and injectors onto the lower manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the fuel injector electrical connectors and vacuum hoses for the 2012 Dodge Avenger? Posted by Customer
    A:
    Disconnect the fuel injector electrical connectors and various vacuum hoses, labeling them as necessary. Also, disconnect the MAP sensor electrical connector, release the wiring harness clips, and remove the intake manifold bolts and nuts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the first step in replacing the upper intake manifold for the 2012 Dodge Avenger? Posted by Customer
    A:
    The first step is to relieve the fuel system pressure and disconnect the negative battery cable from the remote ground terminal.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the sealing surfaces and gaskets of the lower intake manifold for the 2012 Dodge Avenger? Posted by Customer
    A:
    Clean and inspect the sealing surfaces and gaskets, replacing any that are damaged.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after the installation is complete for the 2012 Chrysler 200? Posted by Customer
    A:
    Finally, run the engine and check for any fuel, vacuum, and coolant leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after the installation is complete for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Finally, run the engine and check for any fuel, vacuum, and coolant leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the upper intake manifold be installed for the 2011 Dodge Avenger? Posted by Customer
    A:
    Install the upper intake manifold onto the lower intake manifold while pulling the bolts up, tightening them in sequence to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the throttle body and vacuum lines during the removal process for the 2015 Chrysler 200? Posted by Customer
    A:
    Disconnect the throttle body electrical connector, remove fasteners from the throttle body support bracket, and label then disconnect the vacuum lines to the manifold. If replacing the intake manifold, remove the throttle body; otherwise, it can remain attached.
    Posted by MoparPartsGiant Specialist
    Q:
    How should RTV sealant be applied for the 2017 Chrysler 200? Posted by Customer
    A:
    Apply a bead of RTV sealant around the front and rear cylinder head water passages before laying the new gaskets in place, and apply RTV sealant to the manifold side of the gaskets around the water passages.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4593916AA, the Right Choice

To ensure reliability, purchase Mopar part # 4593916AA Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4593916AA Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly