Make sure this part fits

Chrysler 4884495AF Intake Manifold W/Imc Solenoid

2008 Chrysler Sebring 4884495AF

Customer Questions & Expert Answers (9)
Mopar 4884495AF Intake Manifold W/Imc Solenoid
  • Part Description
    Manifold-Intake
  • Replaced By
    4884495AK
  • Manufacturer
    Mopar
Make sure this part fits
$524.52 MSRP: $712.00
You Save: $187.48 (27%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4884495AF
    Part DescriptionManifold-Intake
    Item Dimensions21.8 x 18.5 x 9.2 inches
    Item Weight12.80 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4884495AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Chrysler Sebring4 Cyl 2.4LLimited Sedan, LX Convertible, LX Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4884495AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the intake manifolds for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Refill the cooling system if it was drained, start the engine, and check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken before working on the lower intake manifold for the 2013 Dodge Avenger? Posted by Customer
    A:
    Ensure the engine is completely cool before draining the cooling system and removing the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after the installation is complete for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Refill the cooling system, then run the engine and check for any fuel, vacuum, and coolant leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed for the 2009 Chrysler Sebring? Posted by Customer
    A:
    For 2014 and earlier models, you need to remove the engine cover, air inlet resonator, ignition coil pack, and fuel rail assembly. Additionally, disconnect the oil temperature sensor and unplug the electrical connectors from the VVT solenoid, MAP sensor, and CMP sensor, moving the electrical harness out of the way.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Remove the air intake duct and air filter housing, then label and disconnect the vacuum hoses and electrical connectors attached to the upper intake manifold and throttle body, including the Electronic Throttle Control system.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for the lower intake manifold for the 2014 Dodge Avenger? Posted by Customer
    A:
    Disconnect the fuel line to the fuel rail and remove the fuel injectors and fuel rail, noting that the lower intake manifold can be removed with the injectors and fuel rail in place.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2009 Dodge Avenger? Posted by Customer
    A:
    Remove the air intake duct and air filter housing, then label and disconnect the vacuum hoses and electrical connectors attached to the upper intake manifold and throttle body, including the Electronic Throttle Control system.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in removing the intake manifold fasteners and gasket for the 2011 Dodge Avenger? Posted by Customer
    A:
    Remove the intake manifold fasteners and gasket.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4884495AF, the Right Choice

To ensure reliability, purchase Mopar part # 4884495AF Intake Manifold W/Imc Solenoid. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4884495AF Intake Manifold W/Imc Solenoid. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly