Make sure this part fits

Chrysler 4892233AB Engine Intake Manifold Lower

2009-2010 Chrysler 4892233AB

Customer Questions & Expert Answers (12)
Mopar 4892233AB Engine Intake Manifold Lower
  • Part Description
    Manifold-Intake
  • Position
    Lower
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4892233AB
    Part DescriptionManifold-Intake
    Other NamesIntake Manifold
    Item Dimensions22.2 x 11.3 x 6.4 inches
    Item Weight6.60 Pounds
    PositionLower
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4892233AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Chrysler Sebring6 Cyl 3.5LLimited Convertible, Limited Sedan, Touring Sedan
    2009-2010 Chrysler Town & Country6 Cyl 4.0LLimited, LX, Touring, Touring Plus
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4892233AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What initial steps are required for the 2008 Chrysler Sebring before removing the intake manifold? Posted by Customer
    A:
    For 2015 and later models, raise the front of the vehicle and support it securely, then remove the front suspension subframe and right driveaxle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the manifold is stuck to the cylinder heads for the 2008 Chrysler Sebring? Posted by Customer
    A:
    If the manifold is stuck, force may be required to break the gasket seal, but avoid prying between the manifold and the heads to prevent damage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the upper intake manifold before removing it for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Remove the support bracket-to-upper manifold nuts, loosen the bolts on the manifold without removing them, and then take off the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be done with the EGR pipe for the 2014 Dodge Avenger? Posted by Customer
    A:
    Remove the bolts securing the EGR pipe to the upper intake manifold and take off the brackets from the throttle body and the right side of the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be noted about the heater core return tube on the 2014 Dodge Avenger? Posted by Customer
    A:
    There is no nut retaining the heater core return tube on 2015 and later models.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after disconnecting the necessary components for the 2011 Dodge Avenger? Posted by Customer
    A:
    Next, remove the EGR pipe and the upper intake manifold support brackets, loosen the upper intake manifold bolts in the reverse order of the tightening sequence, and remove the manifold along with the foam insulator pad.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed for the 2011 Dodge Avenger? Posted by Customer
    A:
    For 2014 and earlier models, you need to remove the engine cover, air inlet resonator, ignition coil pack, and fuel rail assembly. Additionally, disconnect the oil temperature sensor and unplug the electrical connectors from the VVT solenoid, MAP sensor, and CMP sensor, moving the electrical harness out of the way.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What cables need to be disconnected before removing the throttle body for the 2015 Dodge Grand Caravan? Posted by Customer
    A:
    Disconnect the accelerator cable and Throttle Valve cable from the throttle body.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing new manifolds for the 1989 Dodge Grand Caravan? Posted by Customer
    A:
    If replacing either manifold, transfer the studs from the old manifold to the new one. For a SOHC engine, apply a thin coat of gasket sealant to the manifold sides of the new gaskets and place them in position on the manifolds.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed after disconnecting the battery for the 1987 Dodge Grand Caravan? Posted by Customer
    A:
    You need to remove the air intake plenum, fuel rail, and injectors, being prepared to catch any fuel that may spill.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the upper intake manifold for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Install the upper intake manifold onto the lower intake manifold, tightening the bolts according to the recommended sequence.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4892233AB, the Right Choice

To ensure reliability, purchase Mopar part # 4892233AB Engine Intake Manifold Lower. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4892233AB Engine Intake Manifold Lower. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly