Make sure this part fits

Chrysler 68004325AA Intake Manifold

2007-2010 Chrysler Sebring 68004325AA

Customer Questions & Expert Answers (9)
Mopar 68004325AA Intake Manifold
  • Part Description
    Manifold-Intake
  • Replaces
    68001461AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68004325AA
    Part DescriptionManifold-Intake
    Item Dimensions26.3 x 13.4 x 8.5 inches
    Item Weight5.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces68001461AA
    ManufacturerMopar
    SKU68004325AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler SebringLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68004325AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    Which components need to be disconnected from the wiring harness for the 2008 Dodge Avenger? Posted by Customer
    A:
    Disconnect the wiring harness from the MAP sensor, the Electronic Throttle Control, the PCV valve hose, vapor purge hose, and brake booster hoses.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the fuel injectors and fuel rail were removed for the 2007 Chrysler Sebring? Posted by Customer
    A:
    If removed, install the fuel injectors and the fuel rail.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the upper intake manifold bolts be loosened for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Loosen the upper intake manifold bolts, starting with the outer bolts and working inward, then remove the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the sealing surfaces and gaskets for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Clean and inspect the sealing surfaces and gaskets, replacing any that are damaged, while reusing those that are intact.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2012 Dodge Avenger? Posted by Customer
    A:
    Remove the air intake duct and air filter housing, then label and disconnect the vacuum hoses and electrical connectors attached to the upper intake manifold and throttle body, including the Electronic Throttle Control system.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps should be taken after turning the manifold over for the 2012 Dodge Avenger? Posted by Customer
    A:
    Remove the heater supply tube and replace the O-ring with a new one. Use a scraper to remove all traces of old gasket material and sealant from the manifold and cylinder heads, then clean the mating surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in removing the intake manifold fasteners and gasket for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Remove the intake manifold fasteners and gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the new intake manifold for the 2010 Dodge Avenger? Posted by Customer
    A:
    Clean all gasket surfaces before installing the new manifold with a new gasket, tightening the fasteners gradually and evenly in the specified sequence, and complete the installation in reverse order of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68004325AA, the Right Choice

To ensure reliability, purchase Mopar part # 68004325AA Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68004325AA Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly