Chrysler 4805332AB Inside Rear View Mirror

You can Select Your Vehicle to check if 4805332AB fits your vehicle.

Most electric rear view mirrors utilize two motors for adjustments, one for vertical movement and another for horizontal movement. The control switch features a selector that directs voltage to either the left or right side mirror. With the ignition ON but the engine OFF, roll down the windows and operate the mirror control switch through all functions for both mirrors. Listen carefully for the sound of the electric motors running; if the motors are audible but the mirror glass remains stationary, there may be an issue with the drive mechanism inside the mirror. If there is no sound from the mirrors, check the fuse. If the fuse is intact, remove the mirror control switch and have its continuity checked by a qualified repair facility. Additionally, test the ground connections. If the mirror still does not function, remove it and check for voltage at the wires. If there is no voltage in each switch position, inspect the circuit between the mirror and control switch for any opens or shorts. If voltage is present, remove the mirror and test it off the vehicle using jumper wires, replacing it if it fails this test.

Most electric rear view mirrors utilize two motors for adjustments, one for vertical movement and another for horizontal movement. The control switch features a selector that directs voltage to either the left or right side mirror. With the ignition ON but the engine OFF, roll down the windows and operate the mirror control switch through all functions for both mirrors. Listen for the sound of the electric motors; if they are audible but the mirror glass remains stationary, there may be an issue with the drive mechanism. If there is no sound from the mirrors, check the fuse. If the fuse is intact, remove the mirror control switch and have its continuity tested by a qualified repair facility. Additionally, inspect the ground connections and check for voltage at the mirror when the switch is activated. If voltage is absent in each switch position, investigate the circuit for any opens or shorts. If voltage is present, remove the mirror and test it off the vehicle using jumper wires, replacing it if it does not pass the test.

Installation is the reverse of removal.

For power mirrors, remove the watershield and then unplug the electrical connector. After that, remove the nuts and detach the mirror from the mirror stanchion on the door.