Chrysler 5175966AA Fuel Pump/Level Unit Module Kit

You can Select Your Vehicle to check if 5175966AA fits your vehicle.

The fuel level sending unit is secured to the fuel pump housing by a pair of mounting rails on the side of the housing. To remove the sending unit from these two rails you must disengage a pair of locking lugs, located on the underside of the sending unit, that can only be disengaged from the mounting rails by aligning them with the cutouts in the rails. Using an awl or a small screwdriver, carefully lever the lug on the fuel level sending unit toward the area between the two mounting rails until it disengages from the locking lug on the upper rail. Then slide the sending unit to the left until the lugs on the underside of the sending unit are aligned with the cutouts in the mounting rails and lift off the sending unit.

Loosen the locknut securing the assembly using a brass punch and hammer, and carefully lift it from the fuel tank, being mindful of the float arm and fuel pump inlet strainer.