Chrysler 5142561AA Disc Brake Pad Set, Front Rear

You can Select Your Vehicle to check if 5142561AA fits your vehicle.

If replacing the front pads, secure the caliper with a piece of wire in the pivoted up position. For rear calipers, pivot the caliper down and secure it.

Pull out the upper and lower guide pins and clean them. Then apply a coat of high-temperature grease to the pins and reinstall them.

Pull the inboard brake pad from the caliper, ensuring only one pad is removed at this step. Use prybars or screwdrivers to slowly push the caliper pistons into the bores, being cautious to prevent one piston from being forced out while the other is pushed in. Prepare each new brake pad with a small amount of copper-based brake paste on the edges that contact the caliper and backing plates, then position the new inboard brake pad into the caliper. Pull the inner brake pad from the caliper and repeat the piston retraction for the outer pistons. Prepare the new outer brake pad and position it into the caliper.

If replacing the front pads, secure the caliper with a piece of wire in the pivoted up position. For rear calipers, pivot the caliper down and secure it.