Make sure this part fits

Chrysler 4591983AC Plenum-Intake Manifold

2008-2010 Chrysler Sebring 4591983AC

Customer Questions & Expert Answers (9)
Mopar 4591983AC Plenum-Intake Manifold
  • Part Description
    PLENUM Intake Manifold
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4591983AC
    Part DescriptionPLENUM Intake Manifold
    Other NamesIntake Plenum, Plenum
    Item Dimensions21.8 x 18.9 x 9.4 inches
    Item Weight18.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4591983AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2010 Chrysler Sebring6 Cyl 2.7LLimited Sedan, LX Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4591983AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed for the 2010 Chrysler Sebring during the intake manifold removal process? Posted by Customer
    A:
    Unscrew the intake manifold lower bracket, remove the intake tube, and loosen the upper support bracket bolts. Remove the throttle body bracket and throttle body, cut through the fuel injector foam silencing pad, disconnect the VVAA solenoid electrical connectors, and remove the intake manifold silencer cover.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the upper intake manifold for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Remove the air intake duct and air filter housing, then label and disconnect the vacuum hoses and electrical connectors attached to the upper intake manifold and throttle body, including the Electronic Throttle Control system.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the new intake manifold for the 2014 Dodge Avenger? Posted by Customer
    A:
    Clean all gasket surfaces before installing the new manifold with a new gasket, tightening the fasteners gradually and evenly in the specified sequence, and complete the installation in reverse order of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the remaining hoses before removing the lower intake manifold for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Label and detach any remaining hoses that may interfere with the removal of the lower intake manifold, then remove the fuel rail and injectors, as well as the heater and coolant hoses.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after disconnecting the necessary components for the 2012 Dodge Avenger? Posted by Customer
    A:
    Next, remove the EGR pipe and the upper intake manifold support brackets, loosen the upper intake manifold bolts in the reverse order of the tightening sequence, and remove the manifold along with the foam insulator pad.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after installing the fuel injectors and fuel rail for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Install new intake manifold seals to the manifold, ensuring no rags or towels are left in the manifold ports.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the lower intake manifold be installed for the 2013 Dodge Avenger? Posted by Customer
    A:
    Carefully lower the lower intake manifold into place and install the mounting bolts finger-tight, then tighten the bolts in steps according to the torque specifications.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after the installation is complete for the 2011 Dodge Avenger? Posted by Customer
    A:
    Refill the cooling system, then run the engine and check for any fuel, vacuum, and coolant leaks.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4591983AC, the Right Choice

To ensure reliability, purchase Mopar part # 4591983AC Plenum-Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4591983AC Plenum-Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly