Make sure this part fits

Chrysler 4593649AD Plenum-Intake Manifold

2007-2010 Chrysler Sebring 4593649AD

Customer Questions & Expert Answers (9)
Mopar 4593649AD Plenum-Intake Manifold
  • Part Description
    PLENUM Intake Manifold Inclues Items In The Box
  • Replaces
    4593649AC, 4593649AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4593649AD
    Part DescriptionPLENUM Intake Manifold Inclues Items In The Box
    Other NamesIntake Plenum, Plenum
    Item Dimensions25.3 x 25.0 x 9.8 inches
    Item Weight25.10 Pounds
    ConditionNew
    Replaces4593649AC, 4593649AB
    ManufacturerMopar
    SKU4593649AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler Sebring6 Cyl 3.5LLX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4593649AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the lower intake manifold for the 2011 Dodge Avenger? Posted by Customer
    A:
    Remove the lower intake manifold bolts and take the manifold off the cylinder heads, discarding the six manifold-to-cylinder head seals.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the fuel injectors and fuel rail were removed for the 2010 Chrysler Sebring? Posted by Customer
    A:
    If removed, install the fuel injectors and the fuel rail.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step to begin the removal of the intake manifold for the 2010 Dodge Avenger? Posted by Customer
    A:
    The first step is to relieve the fuel system pressure and disconnect the negative battery cable.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the sealing surfaces and gaskets for the 2013 Dodge Avenger? Posted by Customer
    A:
    Clean and inspect the sealing surfaces and gaskets, replacing any that are damaged, while reusing those that are intact.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for removing the lower intake manifold for the 2010 Chrysler Sebring? Posted by Customer
    A:
    First, remove the upper intake manifold, then label and detach any remaining hoses that may interfere with the removal. Remove the fuel rail and injectors, loosen the lower intake manifold mounting bolts in 1/4-turn increments until they can be removed by hand, and be cautious not to pry between the manifold and the heads to avoid damaging the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the fuel injector electrical connectors and vacuum hoses for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Disconnect the fuel injector electrical connectors and various vacuum hoses, labeling them as necessary. Also, disconnect the MAP sensor electrical connector, release the wiring harness clips, and remove the intake manifold bolts and nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be done with the EGR pipe for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Remove the bolts securing the EGR pipe to the upper intake manifold and take off the brackets from the throttle body and the right side of the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the upper intake manifold bolts be loosened for the 2008 Dodge Avenger? Posted by Customer
    A:
    Loosen the upper intake manifold bolts, starting with the outer bolts and working inward, then remove the upper intake manifold.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4593649AD, the Right Choice

To ensure reliability, purchase Mopar part # 4593649AD Plenum-Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4593649AD Plenum-Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly