Make sure this part fits

Chrysler 4781577AF Plenum-Intake Manifold

2004-2007 Chrysler Town & Country 4781577AF

Customer Questions & Expert Answers (8)
Mopar 4781577AF Plenum-Intake Manifold
  • Part Description
    PLENUM Intake Manifold
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4781577AF
    Part DescriptionPLENUM Intake Manifold
    Other NamesIntake Plenum
    Item Dimensions21.2 x 20.0 x 8.1 inches
    Item Weight6.00 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4781577AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2007 Chrysler Town & Country6 Cyl 3.3LBase, EL, LX FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4781577AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    Which sensors and connectors need to be disconnected for the lower intake manifold for the 2003 Dodge Caravan? Posted by Customer
    A:
    Disconnect the coolant temperature sensor and the fuel injector wire harness connector.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How do you handle the power steering reservoir during the removal process for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Remove the power steering reservoir by loosening its mounting bolts and positioning it aside without disconnecting the fluid lines.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the lower intake manifold for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Install the lower intake manifold support bracket and tighten the bolts, then reverse the removal process for the remaining components.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed after draining the cooling system for the 2003 Dodge Caravan? Posted by Customer
    A:
    Next, remove the air filter housing and air intake duct, disconnect the throttle and cruise control cables if equipped, and disconnect the AIS motor, TPS, and MAP sensor connectors. Also, disconnect the vapor purge vacuum hose and the PCV hose.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing new manifolds for the 2002 Dodge Grand Caravan? Posted by Customer
    A:
    If replacing either manifold, transfer the studs from the old manifold to the new one. For a SOHC engine, apply a thin coat of gasket sealant to the manifold sides of the new gaskets and place them in position on the manifolds.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the first step to remove the intake manifold for the 2002 Dodge Grand Caravan? Posted by Customer
    A:
    The first step is to relieve the fuel system pressure and disconnect the negative battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the mating surfaces be prepared for installation for the 1993 Dodge Grand Caravan? Posted by Customer
    A:
    Ensure the mating surfaces of the cylinder heads and manifold are clean, using gasket removal solvents if necessary. Use a gasket scraper to eliminate any old sealant and clean the surfaces with lacquer thinner or acetone, removing any debris from the intake ports.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4781577AF, the Right Choice

To ensure reliability, purchase Mopar part # 4781577AF Plenum-Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4781577AF Plenum-Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly