Make sure this part fits

Chrysler 4781578AG Plenum-Intake Manifold

2005-2007 Chrysler 4781578AG

Customer Questions & Expert Answers (8)
Mopar 4781578AG Plenum-Intake Manifold
  • Part Description
    PLENUM Intake Manifold See Notes
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4781578AG
    Part DescriptionPLENUM Intake Manifold See Notes
    Other NamesIntake Plenum, Plenum
    Item Dimensions17.7 x 15.6 x 10.5 inches
    Item Weight5.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4781578AG
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2006 Chrysler Pacifica6 Cyl 3.8LBase FWD
    2005-2007 Chrysler Town & Country6 Cyl 3.8LEX, Limited FWD, Touring FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4781578AG fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the lower intake manifold for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Carefully lower the lower intake manifold into place, install the mounting bolts finger-tight, and then tighten them in three steps following the recommended sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    Which sensors and lines should be disconnected from the intake manifold for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Disconnect the electrical connectors from the throttle position sensor and the MAP sensor, as well as the vacuum lines for the purge solenoid and PCV valve.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What needs to be done for the lower intake manifold for the 2007 Dodge Caravan? Posted by Customer
    A:
    For the lower intake manifold, disconnect the fuel hose fitting, remove the ignition coil pack and bracket, disconnect the heater supply hose and ECT, and remove the fuel rail and injector assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the gasket material be treated during the removal process for the 2007 Dodge Caravan? Posted by Customer
    A:
    Carefully scrape all traces of gasket material from both the cylinder head and the intake manifold surfaces, ensuring not to nick or gouge the aluminum.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the manifolds be cleaned and inspected for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    Clean the manifolds with solvent and dry them with compressed air, check the mating surfaces for flatness with a precision straightedge and feeler gauges, and inspect the manifolds for cracks and distortion, replacing or resurfacing them if necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the coolant tube flange bolts for the 1992 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the coolant tube flange bolts and loosen the manifold retaining nuts in 1/4-turn increments until they can be removed by hand, starting with the outer nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the intake manifold mounting bolts be removed for the 2016 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the intake manifold mounting bolts using a circular pattern. If the manifold is stuck, carefully pry on a casting protrusion without damaging the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4781578AG, the Right Choice

To ensure reliability, purchase Mopar part # 4781578AG Plenum-Intake Manifold. It is sometimes referred to as Chrysler Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Pacifica, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4781578AG Plenum-Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly