×
Contact Us Live Chat or 1-888-511-3595
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Chrysler 2806270 Pump-Engine Oil

1984-1989 Chrysler Fifth Avenue 2806270

Customer Questions & Expert Answers (5)
Mopar 2806270 Pump-Engine Oil
Mopar 2806270 Pump-Engine Oil
Mopar 2806270 Pump-Engine Oil
Mopar 2806270 Pump-Engine Oil
Mopar 2806270 Pump-Engine Oil
  • Part Description
    Pump, Oil
  • Replaced By
    2806270AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 2806270 Pump-Engine Oil is Ref No. 4 in the diagram below

    1991 Dodge Dakota Pump-Engine Oil Diagram for 2806270
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number2806270
    Part DescriptionPump, Oil
    Item Dimensions6.8 x 4.1 x 4.3 inches
    Item Weight3.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU2806270
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1984-1989 Chrysler Fifth Avenue8 Cyl 5.2L

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 2806270 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you properly disassemble, inspect, and reassemble an oil pump in six cylinder engine on Dodge Ramcharger? Posted by Customer
    A:
    Remove the pump cover and sealing rings if not already done, then use a puller to take out the drive gear. Next, remove the rotor and shaft, lifting out the outer rotor. Unscrew and take out the oil pressure relief valve plug, along with the spring and plunger. Clean all parts thoroughly with solvent and check the mating surface of the pump cover for wear, grooves, and damage; if any issues are found, replace the oil pump with a new or rebuilt one. Use a straightedge and feeler gauge to check surface variation across the pump cover, comparing the measurement to the specifications; if it does not meet the required range, replace the oil pump. Measure the thickness and diameter of the outer rotor and the thickness of the inner rotor, comparing these results to the specifications and replacing the inner rotor if necessary. Install the outer rotor into the pump body, pressing it to one side, and measure the clearance between the rotor and the pump body, replacing the pump if the measurement exceeds the specified maximum clearance. Next, install the inner rotor and shaft into the pump body, checking the clearance between the inner and outer rotors; if specifications are not met, replace the shaft and both rotors. Measure the clearance between the pump face and rotors using a straightedge and feeler gauge, ensuring the straightedge lies across the pump face between the bolt holes; replace the pump if specifications are not met. Finally, measure the free length of the relief valve spring and compare it to the specifications, replacing the spring if necessary. Reassembly follows the reverse of disassembly, ensuring all parts are generously lubricated with engine oil and tightening the cover bolts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the oil pump for the 1985 Dodge Ramcharger? Posted by Customer
    A:
    Install the oil pump and tighten the mounting bolts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the cover bolts be secured during installation for the 1991 Dodge Ramcharger? Posted by Customer
    A:
    Tighten the cover bolts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the retainer cap after inserting the screw for the 1991 Dodge Ramcharger? Posted by Customer
    A:
    Clamp the screw in a vise and tap the pump body until the retainer cap is pulled out.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 2806270, the Right Choice

To ensure reliability, purchase Mopar part # 2806270 Pump-Engine Oil. It is sometimes referred to as Chrysler Oil Pump. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Fifth Avenue models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 2806270 Pump-Engine Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly