Make sure this part fits

Chrysler 5037687AB Pump-Engine Oil

2005-2010 Chrysler 300 5037687AB

Customer Questions & Expert Answers (14)
Mopar 5037687AB Pump-Engine Oil
  • Part Description
    Pump Engine Oil
  • Replaces
    5037687AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5037687AB
    Part DescriptionPump Engine Oil
    Other NamesOil Pump
    Item Dimensions8.3 x 8.4 x 4.1 inches
    Item Weight3.30 Pounds
    ConditionNew
    Replaces5037687AA
    ManufacturerMopar
    SKU5037687AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Chrysler 3008 Cyl 6.1LC RWD, C SRT8 RWD, Touring RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5037687AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the oil pump for the 2007 Chrysler 300? Posted by Customer
    A:
    After installing the oil pump, fill the crankcase with the proper type and quantity of engine oil, change the oil filter, and refill the cooling system. Finally, run the engine and check for oil pressure and leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do once the oil pump is removed for the 2006 Chrysler 300? Posted by Customer
    A:
    Inspect all components for wear and damage. Remove the front cover on the oil pump housing and clean all components with solvent. Check the oil pressure relief valve sliding surface and valve spring, replacing them if damaged. Use a feeler gauge and a micrometer or dial caliper to check the clearance of various oil pump components and compare the measurements to the specified clearance. If any clearance is excessive, replace the entire oil pump assembly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What should be done with the oil pump pick-up tube during installation for the 2013 Dodge Challenger? Posted by Customer
    A:
    Install a new O-ring onto the oil pump pick-up tube, connect the tube to the pump, and tighten the bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do if the oil pressure relief valve is damaged for the 2012 Dodge Challenger? Posted by Customer
    A:
    If the oil pressure relief valve is damaged, replace the oil pump as one complete assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What parts should be inspected during the inspection process for the 2006 Dodge Charger? Posted by Customer
    A:
    Clean all parts thoroughly in solvent and carefully inspect the rotors, pump cover, and oil pump housing for nicks, scratches, or burrs.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What is the caution regarding the oil pressure relief valve for the 2007 Dodge Charger? Posted by Customer
    A:
    The oil pressure relief valve must not be removed from the oil pump housing on this engine. If it is removed, the entire oil pump assembly must be replaced with a new unit.
    Posted by MoparPartsGiant Specialist
    Q:
    How can you check the clearance of various oil pump components for the 2017 Dodge Challenger? Posted by Customer
    A:
    Use a feeler gauge and a micrometer or dial caliper to check the clearance of components, including cover flatness, outer rotor diameter and thickness, inner rotor thickness, and several clearances.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What should be done with the oil pump timing chain gear during installation for the 2017 Dodge Challenger? Posted by Customer
    A:
    Center the oil pump timing chain gear onto the oil pump shaft and install the T45 mounting bolt, ensuring the gear faces the same way as when it was removed.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the oil pump from the block for the 2008 Chrysler 300? Posted by Customer
    A:
    Unbolt the cover from the back of the oil pump housing and remove the inner and outer rotors from the oil pump body, noting their installed direction for reassembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What is a common problem with the replacement oil pumps on the 2007 Dodge Charger? Posted by Customer
    A:
    The replacement oil pumps may experience oil pressure problems due to a collapsing oil pressure relief valve and spring.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the caution regarding the oil pressure relief valve for the 2007 Dodge Magnum? Posted by Customer
    A:
    The oil pressure relief valve must not be removed from the oil pump housing on this engine. If it is removed, the entire oil pump assembly must be replaced with a new unit.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the inner rotor be installed in the oil pump assembly for the 2007 Dodge Magnum? Posted by Customer
    A:
    Install the inner rotor with the mark facing up.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What is a common problem with the replacement oil pumps on the 2006 Dodge Magnum? Posted by Customer
    A:
    The replacement oil pumps may experience oil pressure problems due to a collapsing oil pressure relief valve and spring.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5037687AB, the Right Choice

To ensure reliability, purchase Mopar part # 5037687AB Pump-Engine Oil. It is sometimes referred to as Chrysler Oil Pump. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5037687AB Pump-Engine Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly