Chrysler 4677524AA Engine Cooling Radiator

You can Select Your Vehicle to check if 4677524AA fits your vehicle.

Set the parking brake, raise the front of the vehicle and support it securely on jackstands. Drain the cooling system. If the coolant is relatively new and in good condition, save it and reuse it. Remove the engine cooling fans. Detach the coolant reservoir hose from the radiator filler neck and retainer and then move it aside. Remove the vapor purge solenoid from its mounting bracket. Remove the lower engine splash shield. Disconnect the upper and lower radiator hoses. Carefully separate the NC condenser from the radiator by removing the fasteners and then pulling the condenser up to release the lower clips.

Disconnect the cable from the negative battery terminal.

Disconnect the negative battery cable. Drain the cooling system. Disconnect the overflow hose from the radiator filler neck and remove the reservoir. Loosen the hose clamps and detach the upper and lower coolant hoses from the radiator. If the vehicle has an automatic transaxle, also disconnect and plug the cooler lines. Unplug the electrical connector from the coolant temperature sensor. Remove the radiator mounting bolts and carefully lift out the radiator. Check for leaks and damage. Remove bugs and dirt from the radiator.