Chrysler R0400209 Rack And Pinion Gear

You can Select Your Vehicle to check if R0400209 fits your vehicle.

Lift the vehicle and remove the front wheels and steering column assembly. Disconnect the tie-rod ends and remove the anti-rotational link. Support the crossmember with a jack, remove the Rack And Pinion-to-cross member bolts, and lower the crossmember. Remove the boot seal and splash shields. Disconnect the hoses on power steering models and drain the fluid. Remove the Rack And Pinion. To install, position the Rack And Pinion in the crossmember, attach the tie-rod ends, and reconnect the hoses. Ensure proper alignment on manual steering models. Also, install the boot seal, and splash shields, and raise the crossmember. You can install the steering column assembly and front wheels. Bleed the steering system on power steering models and check for leaks.

Support the front crossmember with a jack, remove the bolts holding the crossmember to the body, lower the jack and crossmember.

To install the steering gear, position it in the crossmember, install the bolts, and tighten them securely. Attach the tie-rod ends to the steering knuckles. On power steering equipped models, reconnect the hoses (using new O-rings).