Chrysler 5149054AB Sensor-CAMSHAFT

You can Select Your Vehicle to check if 5149054AB fits your vehicle.

Raise the front end of the vehicle and place it securely on jackstands.

The CMP sensor is located on the left rear of the timing gear cover, below the injection pump.

Inspect the CMP sensor O-ring for any damage and replace if necessary. Apply a small amount of clean engine oil to the sensor O-ring and use a rocking motion to install it into the sensor mounting bore. Ensure that the CMP sensor mounting flange is fully seated against the mounting surface. Inspect the old CMP sensor O-ring for damage and replace if needed. Apply engine oil to the O-ring and install it using a rocking motion. Make sure the CMP sensor mounting flange is fully seated. Check the O-ring for damage and apply engine oil before reinstalling the sensor. The remaining installation steps are the reverse of removal.

Remove the sensor mounting bolt and remove the CMP sensor.