Chrysler 4686360 Throttle Position Sensor

You can Select Your Vehicle to check if 4686360 fits your vehicle.

To remove the camshaft reference sensor on 3.3L and 3.8L models, detach the sensor lead, loosen the bolt, and remove the sensor. If reusing, clean the sensor face and replace the spacer and O-ring. To install a new sensor, ensure it has a paper spacer and mount the O-ring. For the charge temperature sensor, unplug the connector, replace the sensor, and secure it with tape. For the coolant sensor, replace the cap, and the sensor, and check the coolant level. For the crankshaft sensor, unplug the connector, loosen the bolt, remove the sensor, and replace the spacer if reusing. For the TPS, check resistance readings, and replace if it is incorrect.

If the TPS malfunctions, a trouble code is stored in the logic module's memory.

To remove the TPS, disconnect the negative battery cable and unplug the electrical connector. Then, remove the TPS to throttle body screws and withdraw the TPS from the throttle shaft.