Chrysler 52111371AC Rear Axle Shaft

You can Select Your Vehicle to check if 52111371AC fits your vehicle.

To remove the driveaxle, you should guide it out from under the vehicle.

Start by raising the rear of the vehicle and supporting it with jackstands. Remove the rear wheels and disconnect the driveshaft and ABS sensor. Disconnect the parking brake cable and unscrew the vent hose fitting. Disconnect the brake lines and remove the rear brake calipers. Support the rear axle with a floor jack and remove the Watts link bellcrank bolt and stabilizer bar clamp bolts. Remove the lower mounting bolts securing the rear shocks and the upper control arms from the axle brackets. Lower the axle assembly and remove the coil springs. Remove the lower control arms and lower the axle assembly from under the vehicle.

The front axle assembly consists of a differential, two axle shafts, and a pair of driveaxles with inner and outer Constant Velocity (CV) joints.

Take care not to damage the oil seal in the end of the axle housing as the splined end of the axleshaft passes through it.