Chrysler 4743765AA Front Coil Springs

You can Select Your Vehicle to check if 4743765AA fits your vehicle.

Mount the strut clevis bracket portion of the strut assembly in a vise and mark the components for reassembly. Then, install the spring compressor on the spring and compress it sufficiently to relieve all pressure from the upper mount. While holding the damper shaft from turning, loosen the shaft nut with a socket. Remove the nut and upper mount. Inspect the pivot bearing for smooth operation. Carefully lift the compressed spring from the assembly. Remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft. Check the lower spring isolator for cracking and hardness; replace it if necessary.

Explore all options before beginning any work and consider replacing the strut body if a problem develops.

Start by raising the rear of the vehicle and supporting it securely on jackstands. Then, support the axle with a jack and remove the rear wheels. If the vehicle is equipped with automatic air suspension, disconnect the fitting for the height sensor or the air lines from the shock absorbers. Remove the lower and upper shock mounting bolts and detach the shock absorber.