Chrysler 5006778AA Front Coil Spring

You can Select Your Vehicle to check if 5006778AA fits your vehicle.

Complete strut assemblies may be available on an exchange basis, which eliminates much time and work.

Look for cracks or drying out. If cracked or dried out, replace the jounce bumper.

Extend the damper rod to its full length and install the rubber bumper. Install the dust boot onto the damper. Carefully place the coil spring onto the damper, aligning it with the reference marks made during disassembly. Install the upper spring isolator and seat onto the damper shaft, again noting reference marks. Install the upper mount to the damper shaft, noting its alignment. Install the nut on the damper shaft and tighten it. Loosen the coil spring compressor until the top coil is properly seated against the upper spring seat and upper mount. Relieve all tension from the spring compressor and remove the tool from the coil spring. Finally, install the strut/spring assembly.