Make sure this part fits

Chrysler 5168670AA Rear Coil Spring

2011-2013 Chrysler 200 5168670AA

Customer Questions & Expert Answers (7)
Mopar 5168670AA Rear Coil Spring
  • Part Description
    Spring-Rear Coil
  • Replaced By
    5168670AB
  • Manufacturer
    Mopar
Make sure this part fits
$54.71 MSRP: $80.35
You Save: $25.64 (32%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5168670AA
    Part DescriptionSpring-Rear Coil
    Item Dimensions14.8 x 4.9 x 4.8 inches
    Item Weight5.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5168670AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2013 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5168670AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What are some signs of wear that may indicate a problem with the struts or coil springs for the 2016 Chrysler 200? Posted by Customer
    A:
    Some signs of wear include leaking fluid, loss of damping capability, and chipped, sagging, or cracked coil springs.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps after simulating normal ride height for the 2013 Dodge Avenger? Posted by Customer
    A:
    After simulating normal ride height, the lower mounting bolt should be tightened, the wheel and lug nuts should be installed, and the vehicle should be lowered and the lug nuts tightened. On 2014 and earlier models, the shock absorber upper mounting nuts should also be tightened. Finally, the trim panels in the trunk should be reinstalled.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the knuckle be supported during shock absorber removal for the 2013 Chrysler 200? Posted by Customer
    A:
    A floor jack should be used to support the knuckle and raise it slightly.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the tension from the spring be released for the 2014 Chrysler 200? Posted by Customer
    A:
    Slowly release tension from the spring by backing off the spring compressor. Ensure the spring has settled in the locator holes and the brackets/mounts are not twisted or off-center.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What should you do if you notice signs of wear on the struts or coil springs for the 2011 Dodge Avenger? Posted by Customer
    A:
    Before starting any work, it is recommended to explore all options. The strut body cannot be serviced and must be replaced if there is a problem. However, complete strut assemblies with springs may be available on an exchange basis, which can save time and effort. It is important to check the cost and availability of parts before disassembling the vehicle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Coil Springs
    Q:
    What steps should be followed for the 2013 Dodge Avenger? Posted by Customer
    A:
    For coil spring models, raise the rear of the vehicle on jackstands and remove the wheels. Disconnect the stabilizer bar link from the lower control arm. Use a floor jack to support the knuckle and raise it slightly. Remove the lower control arm-to-knuckle bolt and nut. Lower the control arm slowly to remove the spring. Installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5168670AA, the Right Choice

To ensure reliability, purchase Mopar part # 5168670AA Rear Coil Spring. It is sometimes referred to as Chrysler Coil Springs. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5168670AA Rear Coil Spring. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly