Chrysler 4467912 Switch-ASSY. S/R Sensor Magnetic

You can Select Your Vehicle to check if 4467912 fits your vehicle.

Disconnect the cable from the negative terminal of the battery. Remove the starter motor. For a Bosch starter, remove the field terminal nut, disconnect the field terminal, and remove the washer. Remove the three solenoid mounting screws. Work the solenoid off the shift fork and detach it from the drive end housing. Installation is the reverse of removal. For a Nippondenso starter, if you're replacing the starter motor or solenoid, disconnect the field coil strap from the solenoid terminal. To detach the starter motor from the gear reduction assembly, remove the two long through-bolts and pull off the starter. To detach the solenoid from the gear reduction assembly, remove the starter, then remove the two Phillips screws from the gear reduction assembly and pull off the solenoid. Installation is the reverse of removal.