Chrysler 4593892AA Valve-EGR

You can Select Your Vehicle to check if 4593892AA fits your vehicle.

EGR system of 2010 and models previous to it is meant for decreasing oxides of nitrogen (NOx) emissions, which is generated during the high temperatures present in burners and turns into ozone and smog if mixed with reactive hydrocarbons and sunlight. This system of exhaust gases recirculation returns gases to the combustion chambers making air/fuel mixture thinner and also reducing the combustion temperature. All engines incorporate EGR system that comprises PCM, EGR valve and a number of sensors to control the functioning of the EGR valve. The PCM regulates the EGR valve through an electric current that energises a solenoid, which in turn lifts a pintle allowing exhaust gas to flow from the manifold to the intake. The position of the pintle is sensed to maintain an accurate control, failure to which would lead to engine stall or overheating due to improper flow of the EGR. In V6 models EGR valve is installed at the back of the right cylinder head, where some procedures are necessary to extract the component and its installation back, which may involve the disconnecting of EVAP purge solenoid valve and electrical connectors, removal of bolts and gaskets, and erosion and replacement of seals. As for the V8 engines, the EGR valve is positioned at the front of the right cylinder head, and, therefore, disconnection and reconnection are pretty similar, but it is vital to replace the gaskets and seals with new ones.

Component replacement involves removing the EVAP purge solenoid valve and disconnecting electrical connectors before replacing the EGR valve, lower EGR pipe (for 2.7L engine), and upper EGR pipe. New gaskets and seals should be used during installation, and proper torque should be applied to mounting bolts. The EGR system also exists in V8 engines with similar replacement procedures for the EGR valve and EGR pipe.

NOx are compounds formed in combustion chambers when oxygen and nitrogen in incoming air mix at high temperatures.