Chrysler 5080395AA Valve-EGR

You can Select Your Vehicle to check if 5080395AA fits your vehicle.

1. Remove the air filter housing and air intake duct. 2. Detach the Power Distribution Center (POC) from the air filter housing bracket and push it aside. 3. Remove the bolts attaching the EGR tube to the intake manifold. 4. Unclip the EGR transducer bracket. 5. Disconnect the vacuum supply hose from the EGR valve control assembly and the backpressure hose from the transducer. 6. Disconnect the electrical connector from the transducer and the vacuum line from the EGR valve. 7. Remove the bolts attaching the EGR tube to the EGR valve and take out the EGR tube, ensuring not to lose the O-ring at the intake manifold end, which should be inspected and replaced if damaged. 8. Finally, remove the two EGR valve mounting bolts to take out the EGR valve and transducer assembly, discard the old EGR valve gasket, and during installation, use a new gasket while tightening the EGR valve and EGR tube bolts to the specified torque.