Make sure this part fits

Mopar 52114718AA Rear Axle Shaft

2007-2009 Dodge Ram 1500 52114718AA

Customer Questions & Expert Answers (7)
Mopar 52114718AA Rear Axle Shaft
  • Part Description
    Shaft-Axle Rear
  • Replaced By
    68045427AA
  • Manufacturer
    Mopar
Make sure this part fits
$469.70 MSRP: $717.00
You Save: $247.30 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number52114718AA
    Part DescriptionShaft-Axle Rear
    Item Dimensions38.2 x 7.1 x 7.1 inches
    Item Weight27.60 Pounds
    ConditionNew
    ManufacturerMopar
    SKU52114718AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2009 Dodge Ram 15006 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7LLaramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 4WD, SLT Crew CAB 2WD, SLT Crew Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 52114718AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install the rear axle on a Dodge Ram 1500 and Ram 1500? Posted by Customer
    A:
    Lift the rear of the vehicle and support with jack stands. Remove rear wheels and disconnect the driveshaft, ABS sensor(s), and parking brake cable. Detach the brake line junction block and brake lines. Remove rear brake calipers and support the axle with a floor jack. Remove bolts securing rear shocks and U-bolts securing the axle. Lower and remove the axle assembly. For coil spring models, disconnect wiring from wheel speed sensors and remove them. Hang rear brake calipers out of the way and disconnect the vent hose and parking brake cables. Remove stabilizer bar clamps bolts and support the bar. Raise the axle to avoid extending shock absorbers. Unbolt the track bar and remove bolts securing control arms. Lower the axle and remove it. Installation is the reverse of removal. Tighten all fasteners and caliper mounting bolts to the torques. Refill axle with lubricant if needed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the axleshaft for a full-floating axleshaft for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Slip a new gasket over the end of the axleshaft and slide it into the axle housing. Apply RTV sealant to the gasket mating surface of the hub and place the new gasket in position. Push the axleshaft into the axle housing until the splines are fully engaged with the differential. Install the flange bolts and tighten them to the specified torque.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done before rolling the axle assembly from under the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Remove any remaining interfering wiring harness clips. Remove the axle assembly pinion mounting bolts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is recommended when removing the axleshaft to replace the axleshaft seal or bearing for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    It is recommended to have the job done by a dealer service department or a qualified independent garage as it requires special tools.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after loosening the lug nuts for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    After loosening the lug nuts, you should raise and securely support the vehicle with jack stands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the function of the axle in a semi-floating design for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    In a semi-floating design, the axle supports the weight of the vehicle on the axleshaft and transmits driving forces to the rear wheels.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 52114718AA, the Right Choice

To ensure reliability, purchase Mopar part # 52114718AA Rear Axle Shaft. It is sometimes referred to as Mopar Axle Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Dodge Ram 1500 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 52114718AA Rear Axle Shaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly