Make sure this part fits

Jeep BP034700AA Battery-Storage

2003-2016 Jeep BP034700AA

Customer Questions & Expert Answers (12)
Mopar BP034700AA Battery-Storage
  • Part Description
    Battery Storage
  • Replaced By
    BP34A901AA
  • Manufacturer
    Mopar
Make sure this part fits
$371.11 MSRP: $450.00
You Save: $78.89 (18%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberBP034700AA
    Part DescriptionBattery Storage
    Item Dimensions10.2 x 8.2 x 7.2 inches
    Item Weight43.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUBP034700AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2016, 2007-2014 Jeep Compass4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Latitude 4WD, Latitude FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
    2003-2007 Jeep Liberty4 Cyl 2.8L DieselLimited Edition 4WD, Sport 2WD, Sport 4WD
    2016, 2007-2014 Jeep Patriot4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if BP034700AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What does the section discuss in terms of charging the battery for the 2002 Chrysler PT Cruiser? Posted by Customer
    A:
    The section discusses charging the battery.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    What is the target specific gravity reading when testing with a hydrometer for the 2003 Chrysler PT Cruiser? Posted by Customer
    A:
    Aim for approximately 1.270 at 68 degrees F.
    Posted by MoparPartsGiant Specialist
    Q:
    How do I remove the battery tray for the 2009 Dodge Avenger? Posted by Customer
    A:
    Remove the battery. Remove the four battery tray mounting bolts retaining the tray to the left front frame rail. Remove the battery tray through the wheel opening. Thoroughly wash the battery tray in clean water, then dry it with compressed air. Installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    How can the battery be disconnected for service procedures requiring power to be cut from the 2010 Jeep Patriot? Posted by Customer
    A:
    To disconnect the battery for service procedures requiring power to be cut from the vehicle, simply loosen the cable clamp nut and disconnect the cable from the negative battery terminal. It is important to isolate the cable end to prevent accidental contact with the battery terminal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    Where is the battery located for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The battery is mounted behind the lower front portion of the left front fender, and the remote positive and negative terminals are located in the engine compartment at the left strut tower.
    Posted by MoparPartsGiant Specialist
    Q:
    How can corrosion be removed from the battery for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Corrosion can be removed with a baking soda solution. After removing the corrosion, rinse the area and cover damaged metal parts with zinc-based primer and paint.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    How do I remove the battery for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Open the hood, disconnect the intelligent Battery Sensor (lBS) connector, then loosen the nut and disconnect the cable from the negative battery terminal. Loosen the nut and disconnect the cable from the positive battery terminal. Remove the battery cover by pulling it straight up. Remove the battery hold-down clamp. Lift the battery up and out of the engine compartment. If you are replacing the battery, make sure you get one that's identical, with the same dimensions, amperage rating, cold cranking rating, etc. Installation is the reverse of removal. Always connect the positive cable first and the negative cable last.
    Posted by MoparPartsGiant Specialist
    Q:
    Where is the battery located for the 2014 Dodge Avenger? Posted by Customer
    A:
    The battery is mounted behind the lower front portion of the left front fender, and the remote positive and negative terminals are located in the engine compartment at the left strut tower.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    How should corrosion on the battery be dealt with for the 2011 Dodge Avenger? Posted by Customer
    A:
    If corrosion is present, the battery should be removed for cleaning. The ground cable should be removed first. Cable clamps, terminals, and the battery top should be cleaned with a baking soda solution, taking precautions to protect your eyes and hands.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you disconnect the battery cables for the 2012 Jeep Liberty? Posted by Customer
    A:
    Disconnect the negative battery cable first, followed by the positive cable, to avoid shorting the battery.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Car Batteries
    Q:
    How do you remove the battery for the 2017 Jeep Patriot? Posted by Customer
    A:
    Unscrew the bolt and remove the hold-down clamp from the bottom edge of the battery. Lift out the battery using special battery removal tools available at auto parts stores for easier handling.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part BP034700AA, the Right Choice

To ensure reliability, purchase Mopar part # BP034700AA Battery-Storage. It is sometimes referred to as Jeep Car Batteries. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Compass, Liberty, Patriot models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar BP034700AA Battery-Storage. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly