Jeep 4854137 Cable-Accelerator

You can Select Your Vehicle to check if 4854137 fits your vehicle.

2007 and later models do not have an accelerator cable- the throttle body is controlled electronically by the Accelerator Pedal Position (APP) sensor. To remove the cable, start by prying the cable end from the throttle valve pivoting ball using a small screwdriver. Then, depress the cable-to-bracket fitting with a pair of pliers and pull the cable through the bracket. Inside the driver's compartment, depress the throttle pedal and remove the cable stop through the larger opening. Finally, remove the cable from the engine compartment by squeezing the tang with a pair of pliers and pushing the retainer through the opening. Installation is the reverse of removal.