Jeep 68223043AA Core-Heater

You can Select Your Vehicle to check if 68223043AA fits your vehicle.

Place towels underneath the heater core tube fittings, remove the clamps and disconnect the heater hoses from the heater core, remove the bolts holding the heating/air conditioning housing to the instrument panel, remove the front sill trim on both the passenger's and driver's sides, remove the front seats, loosen fasteners and remove the passenger side amplifier, remove the B pillar trim panels and cowl trim panel on the driver's side, remove the center console, pull back the carpet to expose the rear seat ducts, remove the instrument panel, disconnect the shift interlock cable connected to the floor duct and move aside, remove the screws holding the left front floor duct to the heating/air conditioning housing and remove the duct, remove the air conditioner condensation tube, remove the fasteners holding the left and right rear distribution ducts, disconnect the ducts from the heating and air conditioning housing, remove the nut holding the heater/air conditioner housing to the passenger's side dash panel, pull the heater/air conditioning unit rearward, remove the heating/air conditioning housing through the passenger compartment, place the heater/air conditioning housing on a work bench, remove the foam seal from the connection tube flange holding the heater core outlets, un-clip the fasteners securing the flange and remove the flange from the heating/air conditioning housing, remove the fasteners securing the retaining brackets, and remove the heater core line retaining brackets.