Make sure this part fits

Jeep RL021608DE Head-Cylinder

2011-2015 Jeep Grand Cherokee RL021608DE

Customer Questions & Expert Answers (18)
Mopar RL021608DE Head-Cylinder
  • Part Description
    Head Cylinder Right
  • Replaced By
    53021608DF
  • Manufacturer
    Mopar
Make sure this part fits
$243.41 MSRP: $284.00
You Save: $40.59 (15%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberRL021608DE
    Part DescriptionHead Cylinder Right
    Item Dimensions9.5 x 18.9 x 18.9 inches
    Item Weight50.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKURL021608DE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2015 Jeep Grand Cherokee8 Cyl 5.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, Summit AWD, Summit RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if RL021608DE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the external components from the cylinder head for the 2009 Dodge Challenger? Posted by Customer
    A:
    Remove all external components from the cylinder head for thorough cleaning and inspection before servicing at a qualified automotive machine shop.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after installing the cylinder head for the 2008 Dodge Challenger? Posted by Customer
    A:
    Follow the reverse order for reinstallation of the remaining components, change the engine oil and filter, refill the cooling system, start the engine, and check for leaks and proper operation.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket be positioned for the 2017 Dodge Challenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins in the block, ensuring correct installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the procedure for lifting the heads off the engine for the 2011 Dodge Challenger? Posted by Customer
    A:
    Lift the heads off the engine carefully, using a block of wood and a hammer if necessary, and store them on blocks of wood to protect the gasket sealing surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if there are nicks or damage on the mating surfaces for the 2014 Ram 1500? Posted by Customer
    A:
    Inspection of the block and head mating surfaces is essential, addressing any nicks, deep scratches, or damage with filing or machining as necessary.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the final steps and checks after cylinder head installation for the 2018 Ram 1500? Posted by Customer
    A:
    Complete the remaining installation steps, including changing the oil and filter, refilling the cooling system, and priming the fuel filter before starting the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the head bolts dealt with in preparation for head removal for the 2017 Ram 2500? Posted by Customer
    A:
    Loosen the head bolts in increments and remove them by hand.
    Posted by MoparPartsGiant Specialist
    Q:
    What initial preparations should be made before starting the cylinder head removal process for the 2013 Ram 2500? Posted by Customer
    A:
    Before starting, disconnect the batteries' negative terminals and drain the coolant.
    Posted by MoparPartsGiant Specialist
    Q:
    What components of the cylinder head should be removed for the 2017 Ram 1500? Posted by Customer
    A:
    To remove the cylinder head, you need to take off several components including the timing chain, oil control valves, timing chain tensioner, chain guides, camshafts, rocker arms, and lash adjusters.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the new cylinder heads installed for the 2011 Ram 1500? Posted by Customer
    A:
    Position the new gaskets correctly on the dowels in the block. Carefully place the heads on the block without disturbing the gaskets. Coat the head bolt threads with engine oil and install the bolts in their original locations. Tighten the bolts following the recommended sequence and torque specifications.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be tightened for the 2013 Ram 3500? Posted by Customer
    A:
    Bolts should be installed in their original locations, tightened finger-tight, and then tightened to the specified torque and angle of rotation, using an angle measurement gauge during the final tightening stages.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done before installing the cylinder head for the 2013 Ram 2500? Posted by Customer
    A:
    Before installation, ensure perfectly clean mating surfaces between the cylinder head and block, free from carbon, old gasket material, and oil residues. Cleaning with a gasket scraper and lacquer thinner or acetone is recommended.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the steps to remove the cylinder head from the engine block for the 2017 Ram 2500? Posted by Customer
    A:
    After loosening the cylinder head bolts, you can lift the cylinder head off the block.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any additional components that need to be removed before taking off the cylinder head for the 2017 Ram 3500? Posted by Customer
    A:
    Depending on the cylinder head, you may need to remove other components like the alternator, transmission and oil dipstick tube, air conditioning compressor, or heater core tube. Additionally, the timing chain cover should be removed, and the crankshaft should be rotated to Top Dead Center (TDC).
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to prepare for cylinder head removal for the 2016 Ram 3500? Posted by Customer
    A:
    The initial steps are to relieve the fuel system pressure and disconnect the battery. Drain the cooling system and remove the drivebelt. Take out the PCV and EVAP system components, as well as the cowl.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps and checks after cylinder head installation for the 2017 Ram 3500? Posted by Customer
    A:
    Complete the remaining installation steps, including changing the oil and filter, refilling the cooling system, and priming the fuel filter before starting the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    Does this come come complete with valves/valve-trains installed? Posted by Customer: 2014 Ram 1500
    A:
    No, they do not come with the valves/valve-trains
    Posted by MoparPartsGiant Specialist 23/9/2021
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part RL021608DE, the Right Choice

To ensure reliability, purchase Mopar part # RL021608DE Head-Cylinder. It is sometimes referred to as Jeep Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar RL021608DE Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly