Make sure this part fits

Jeep 68045559BA Exhaust Manifold

2011-2021 Jeep Grand Cherokee 68045559BA

Customer Questions & Expert Answers (10)
Mopar 68045559BA Exhaust Manifold
  • Part Description
    Manifold-Exhaust
  • Position
    Driver Side
  • Replaces
    53034137AC, 68045559AB, 68045559AA
  • Manufacturer
    Mopar
Make sure this part fits
$40.43 MSRP: $58.80
You Save: $18.37 (32%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number68045559BA
    Part DescriptionManifold-Exhaust
    Other NamesManifold
    Item Dimensions19.8 x 8.6 x 8.5 inches
    Item Weight10.70 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces53034137AC, 68045559AB, 68045559AA
    ManufacturerMopar
    SKU68045559BA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2021 Jeep Grand Cherokee8 Cyl 5.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Limited AWD, Limited RWD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, Summit AWD, Summit RWD, Trailhawk AWD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68045559BA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after cleaning and inspecting the manifold for the 2013 Ram 1500? Posted by Customer
    A:
    Place the exhaust manifold in position with a new gasket and install the mounting bolts finger tight. Then, starting in the middle and working out toward the ends, tighten the mounting bolts in several increments to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any additional steps to complete the installation for the 2018 Ram 1500? Posted by Customer
    A:
    Yes, install the heat shields and apply anti-seize compound to the exhaust manifold-to-exhaust pipe bolts. Tighten the exhaust pipe bolts securely.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before installing the manifold for the 2015 Ram 2500? Posted by Customer
    A:
    Use new gaskets and apply anti-seize compound on the bolt threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be noted during installation for the 2012 Ram 1500? Posted by Customer
    A:
    The studs go in the holes for the front two cylinders, and an additional one goes at the lower rear.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How should the 2017 Ram 3500 be positioned for this procedure? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2013 Ram 2500 be positioned for this procedure? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before removing the exhaust manifold on the 2017 Ram 2500? Posted by Customer
    A:
    Soak the nuts for at least five minutes with penetrating oil and then replace the fasteners with new ones.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What needs to be removed in order to remove the turbocharger for the 2016 Ram 3500? Posted by Customer
    A:
    The bolts and brackets retaining the heater line(s) to the exhaust manifold. The bolt retaining the heater pipe(s) to the exhaust manifold. The air filter housing and the air intake hose. The heat shield/noise reduction panel from the exhaust manifold. The EGR cooler. The rear bolt lock plates. The exhaust manifold bolts, exhaust manifold, gaskets, and spacers.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in disconnecting the exhaust manifold for the 2012 Ram 3500? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68045559BA, the Right Choice

To ensure reliability, purchase Mopar part # 68045559BA Exhaust Manifold. It is sometimes referred to as Jeep Exhaust Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68045559BA Exhaust Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly