Make sure this part fits

Jeep 4884495AI Intake Manifold

2009-2010 Jeep 4884495AI

Customer Questions & Expert Answers (10)
Mopar 4884495AI Intake Manifold
  • Part Description
    Manifold Intake Includes All Items In The Box
  • Replaced By
    4884495AK
  • Manufacturer
    Mopar
Make sure this part fits
$524.52 MSRP: $712.00
You Save: $187.48 (27%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number4884495AI
    Part DescriptionManifold Intake Includes All Items In The Box
    Item Dimensions9.3 x 18.9 x 21.1 inches
    Item Weight12.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4884495AI
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Jeep Compass4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
    2009-2010 Jeep Patriot4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4884495AI fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after the installation is complete for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Finally, run the engine and check for any fuel, vacuum, and coolant leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the manifold is stuck to the cylinder heads for the 2009 Chrysler Sebring? Posted by Customer
    A:
    If the manifold is stuck, force may be required to break the gasket seal, but avoid prying between the manifold and the heads to prevent damage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed for the 2010 Dodge Avenger? Posted by Customer
    A:
    For 2014 and earlier models, you need to remove the engine cover, air inlet resonator, ignition coil pack, and fuel rail assembly. Additionally, disconnect the oil temperature sensor and unplug the electrical connectors from the VVT solenoid, MAP sensor, and CMP sensor, moving the electrical harness out of the way.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed for the 2008 Chrysler Sebring? Posted by Customer
    A:
    For 2014 and earlier models, you need to remove the engine cover, air inlet resonator, ignition coil pack, and fuel rail assembly. Additionally, disconnect the oil temperature sensor and unplug the electrical connectors from the VVT solenoid, MAP sensor, and CMP sensor, moving the electrical harness out of the way.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after removing the wiring harness retainers for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Remove the nuts and stud bolt, then take off the upper intake manifold bracket.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the sealing surfaces and gaskets of the lower intake manifold for the 2010 Dodge Avenger? Posted by Customer
    A:
    Clean and inspect the sealing surfaces and gaskets, replacing any that are damaged.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps should be taken after turning the manifold over for the 2014 Dodge Avenger? Posted by Customer
    A:
    Remove the heater supply tube and replace the O-ring with a new one. Use a scraper to remove all traces of old gasket material and sealant from the manifold and cylinder heads, then clean the mating surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for the lower intake manifold for the 2013 Dodge Avenger? Posted by Customer
    A:
    Disconnect the fuel line to the fuel rail and remove the fuel injectors and fuel rail, noting that the lower intake manifold can be removed with the injectors and fuel rail in place.
    Posted by MoparPartsGiant Specialist
    Q:
    I am looking for hardware only, nuts/ bolts/ washers for the intake and exhaust, May you please provide the part number? Posted by Customer: 2009 Jeep Patriot
    A:
    EXHAUST: 1022510003 QTY 2 6104215AA QTY 2 6508635AA QTY 1 6508634AA QTY 3 6508185AA QTY 6 6104716AA QTY 4 6104191AA QTY 4 INTAKE: 6104201AA QTY 1 6102417AA QTY 1 6508896AA QTY 4 66508891AA QTY 1 6508891AA QTY 2
    Posted by MoparPartsGiant Specialist 16/8/2021
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4884495AI, the Right Choice

To ensure reliability, purchase Mopar part # 4884495AI Intake Manifold. It is sometimes referred to as Jeep Intake Manifold. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Compass, Patriot models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4884495AI Intake Manifold. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly