Jeep J3242217 Receiver

You can Select Your Vehicle to check if J3242217 fits your vehicle.

To begin, discharge the air conditioning system and disconnect the negative battery cable. Then, unplug the electrical connector from the pressure switch near the top of the receiver-drier. Disconnect the refrigerant line from the receiver-drier, using a backup wrench to prevent twisting the tubing. Make sure to plug the open fittings to prevent dirt and moisture from entering. Next, remove the receiver-drier by loosening the mounting bracket bolts or clamping band screw, depending on the model. If a new receiver-drier is being installed, remove the Schrader valve and pour out the oil, noting the amount. Add fresh refrigerant oil to the new receiver-drier, equal to the amount removed from the old unit plus one ounce. Finally, reverse the removal process for installation and take the vehicle back to the shop for evacuation, charging, and leak testing of the A/C system.

For 2006 and earlier models, unplug the electrical connector from the pressure switch near the top of the receiver/drier and disconnect the refrigerant line. Use a back-up wrench to prevent twisting the tubing and plug the open fittings. Loosen the mounting bracket bolts and remove the receiver/drier. If installing a new receiver/drier, remove the Schrader valve and pour the oil into a measuring cup. Add fresh refrigerant oil to the new receiver/drier.